g.orruņo

Hi, this afternoon i mount a electric steering pump in my 928 s4, the steering pump is for renault clio but my impression is that is hard when i turn, the car hasnt engine and when i turn is not moving.
Anyone knows what pipe is enter and what is exit??

James Bailey

Number 17 is the pressure side enter side . Number 29 is the return

Speedtoys

17 is the high pressure out from the pump.

g.orruņo

17 presure and 29 return.
ok. i mount back out....

Speedtoys

Please...take photos.

??

g.orruņo

ok, tomorrow take a photos.

Speedtoys

Fantastic..curious to see how this works for you.

g.orruņo

my works is done backwards hahaha, i change the holes of the steering rack...

g.orruņo

(((

Speedtoys

So..your pump makes pressure, but you get no assist?

g.orruņo

yesh, the pump have pressure and i have assist.. but for me is good touch but one friend tell me that is hard...

Speedtoys

You have another 928 to compare it to?

g.orruņo

yes, my friend have other.. but it hasnt nothing my electric pump with stock.... i enter the pressure for the left hole in the steering rack and the return i use the right hole( if i seat in drivers position)

Speedtoys

...what do you control the pump with?

g.orruņo

nothing, is all time running;
but the citroen saxo power steering pump have included 2 ralys that when the circuit have presure it stop and when you need pressure it start, it has 4 wire, positive, negative, other for contact and other for the alternator wire. very similar to this:

http://forums.pelicanparts.com/porsc...project-2.html