Anybody ever have a S4 starter go out?
#16
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have one going out now at 110K miles. In my case it's the solenoid, the starter spins but doesn't engage. I have one of Roger's Bosch units still sitting in the box. Need to get moving on the install. Roger what do I look for to tell if it's one of the defective units?
#17
Electron Wrangler
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yes, it labors while cranking, but I am pretty sure it is not the battery. Its hard to explain but there is a grinding feeling and a feeling of resistance, that comes back to the driver. Also the battery is quite new and has not been mistreated in the way I normally do my batteries. I did check the posts and ground wires anyway, and they are fine.
Considering how easy it is to check this vs the other options - I'd do this first...
Alternatives are to have someone monitor the battery voltage while you are cranking it (>8v is good, <7v is bad) or just use an alternate battery that you know is in good health
Good luck.
Alan
#18
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Just thought I would close this one out. The brushes were totally gone and a part of one of the cages that hold the brushes had broken away and was ratteling around in there. Hence the grinding.
Here is a cool fact: If you are on an island, thousands of miles away from the nearest 928 starter, you can take the whole brush plate (the plate, with the cages, brushes and springs) from a VW bug starter and swap it in. Fits right in and works great. The brushes are not quite as long, so I expect shorter brush life. But then it only has to last a couple of weeks until I can get starter sent in. Wish I had taken pictures to post......
Here is a cool fact: If you are on an island, thousands of miles away from the nearest 928 starter, you can take the whole brush plate (the plate, with the cages, brushes and springs) from a VW bug starter and swap it in. Fits right in and works great. The brushes are not quite as long, so I expect shorter brush life. But then it only has to last a couple of weeks until I can get starter sent in. Wish I had taken pictures to post......
#19
Archive Gatekeeper
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So the previous owner of the Cobalt GT had had a number of issues with the starter over two different years running to SITM and back. About 3 months before he parked the car for 6 years he had the starter replaced. There is also an issue at the 14 pin connector or somewhere in the FOE harness, as in 2006 the PO had his shop run an 'auxiliary' yellow wire to the starter:
![](https://webfiles.uci.edu/redwards/public/Cobalt%20Aux%20starter%20wire%20at%20jump%20post%2012-6-14.jpg)
![](https://webfiles.uci.edu/redwards/public/Aux%20starter%20solenoid%20wire%20at%20starter%2012-6-14.jpg)
Anyway- fast forward to today, I tried to start the car to get it out of the garage this AM- hit the key, and the starter would spin but not engage the flywheel. Tried it 3-4 times, and then it started normally.
So where's the lesion? If it's spinning the solenoid is good. What are the odds that the bendix goes intermittent on an almost new starter? Probably more likely that the yellow wire is gamey somewhere along its route...
![](https://webfiles.uci.edu/redwards/public/Cobalt%20Aux%20starter%20wire%20at%20jump%20post%2012-6-14.jpg)
![](https://webfiles.uci.edu/redwards/public/Aux%20starter%20solenoid%20wire%20at%20starter%2012-6-14.jpg)
Anyway- fast forward to today, I tried to start the car to get it out of the garage this AM- hit the key, and the starter would spin but not engage the flywheel. Tried it 3-4 times, and then it started normally.
So where's the lesion? If it's spinning the solenoid is good. What are the odds that the bendix goes intermittent on an almost new starter? Probably more likely that the yellow wire is gamey somewhere along its route...
#21
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Old thread resurrection....
I've got my starter out for some other work.
Would the EBay service kit be some good WIIAT work? I think the starter is original at around 125k miles.
I've got my starter out for some other work.
Would the EBay service kit be some good WIIAT work? I think the starter is original at around 125k miles.
Last edited by ltoolio; 08-02-2015 at 08:04 PM.
#22
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Just buy a good rebuild from Roger and forget it for another 10 years.
#23
Rennlist Member
#24
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#25
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My starter started acting up this year, where after every 5 or so startups, I would hear this sort of loud whizzing noise and no engaging. So I turn the key off and then try it again and it starts quite easily. I suspect the bendix is faulty but then again I am no expert. Is it worth rebuilding/replacing the faulty bendix or should I consider a rebuilt starter from Roger ? The car has 84,000 miles on it. How much is a rebuilt starter, should I be firmly sitting down ?
#26
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Re-manufactured Bosch starter is $118
__________________
![](https://cdn.shopify.com/s/files/1/1694/8685/files/928sRus_rennlist.png?v=1621798567)
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
![](https://cdn.shopify.com/s/files/1/1694/8685/files/928sRus_rennlist.png?v=1621798567)
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
#27
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thank you Roger, that is pretty good ! I was expecting it to cost me an arm ! ![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
Is it the same starter for all model years, mine is an 85 ?
What is the lifecycle of a rebuilt compared to new is there much of a difference, anyone knows ?
If it's the bendix which is at fault is it worth while rebuilding the one I have as a short term fix or I should not bother and go rebuilt right away ?
![hiha](https://rennlist.com/forums/graemlins/roflmao.gif)
Is it the same starter for all model years, mine is an 85 ?
What is the lifecycle of a rebuilt compared to new is there much of a difference, anyone knows ?
If it's the bendix which is at fault is it worth while rebuilding the one I have as a short term fix or I should not bother and go rebuilt right away ?
Last edited by Andre The Giant; 09-06-2016 at 02:35 PM. Reason: Forgot something
#28
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The starter in my '88 wouldn't turn or engage today at the track. I turned the key and nothing. No audible solenoid kick, no whirr, nothing. Battery is healthy, connections are good at the battery. The starter relay was clicking, and a buddy got under the car and said that he felt the solenoid slightly clicking as though it was getting power.
I think that it's the original starter, but I need to look into that.
Beside checking the connections at the starter as well as ground, is there something else I should check before pulling the starter?
I think that it's the original starter, but I need to look into that.
Beside checking the connections at the starter as well as ground, is there something else I should check before pulling the starter?
#30
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My starter went out on the 87 S4 about a year ago. Same symptoms, turn key and nothing, everything else worked. My confirmation was whacking starter with a hammer while someone tried to start. I tapped it twice and car started right up.