jacal128

Three days, not too bad. Replaced the TB, WP, rebuilt the Tensioner, found a ground issue, fixed an oil leak, fixed a vaccum leak, changed all the filters, oil and replaced the rotor caps and rotors. I think with all the other work that has been done she should be mechanically up to date. Going to do the rear axle rebuild in a couple of weeks. Transmission has been rebuilt, torque tube rebuilt, motor mounts new, oil pan gasket replaced ( cork ), new shocks, new brakes. Also did some cleaning and stripped and polished the strut. Attachment 538347

Attachment 538348

Attachment 538349

Attachment 538351

Attachment 538352

Attachment 538354

Attachment 538355

Attachment 538356

Attachment 538357

Bill Ball

You mean you didn't snap any water pump bolts? Too bad.

Congrats. You've done more work on your car than I've done on mine in 11 years.

jacal128

I think the TB and WP had already been done, but had no proof so better to be safe than sorry. Thanks, Jack

Mrmerlin

thats lookin neat clean and tidy, nice work ,
I like the polished cross brace and the painted ends

jacal128

Thanks MrMerlin, I saw one on another thread here. It only took about 1/2 hour to do. Jack

Tails

Jack,
+1 on Bill's and Stan' s comments, you have also done more work on your car that what I have done in 11 years, but I have only 102,000 kilometres on mine (55,000 since my ownership) whereas Bill has done a few more miles than me.

Well done.
Tails 1990 928S4 Auto