Thoughts on Rogers steering rack bushings?
05-13-2011 | 01:13 PM
#17
Three Wheelin'
Joined: Sep 2010
Posts: 1,404
Likes: 20
From: Dallas/Ft. Worth
FWIW, I got mine aligned at NTB last week after install of new motor mounts and delrin bushings along with urethane sway bar bushings. They did an excellent job and was only about $80
Make sure the alignment machine is the type which you drive on, i.e. dont want them to raise the 928 as that will unload the suspension and make alignment incorrect.
Make sure the alignment machine is the type which you drive on, i.e. dont want them to raise the 928 as that will unload the suspension and make alignment incorrect.
05-13-2011 | 01:24 PM
#18
Rennlist Member
Joined: Apr 2006
Posts: 35,700
Likes: 503
05-13-2011 | 02:45 PM
#19
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Joined: Jun 2000
Posts: 40,449
Likes: 98
From: Insane Diego, California
I had Roger's delrin bushings installed on my GTS but the improvement was not as dramatic as reported on older model year cars.
The original bushings in the GTS seem to be made of a harder material and were not as deteriorated as most other cars indicate.
That said, I'm still glad I did it.
The original bushings in the GTS seem to be made of a harder material and were not as deteriorated as most other cars indicate.
That said, I'm still glad I did it.
05-14-2011 | 09:43 AM
#20
Thread Starter
Nordschleife Master
Joined: Jul 2001
Posts: 6,431
Likes: 33
From: Lansing Michigan
FWIW, I got mine aligned at NTB last week after install of new motor mounts and delrin bushings along with urethane sway bar bushings. They did an excellent job and was only about $80
Make sure the alignment machine is the type which you drive on, i.e. dont want them to raise the 928 as that will unload the suspension and make alignment incorrect.
Make sure the alignment machine is the type which you drive on, i.e. dont want them to raise the 928 as that will unload the suspension and make alignment incorrect.
