1988 S4 work done after 4 days... : )
#47
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm three years in on mine, and the cosmetics are still waiting.......![banghead](https://rennlist.com/forums/graemlins/banghead.gif)
Mechanicals are getting there though!![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
And, that's said now after the following:
New pads, rotors, sensors, fluid flush.
PSD flush and fill.
Differential flush and fill;
Trans filter, gaskets and fresh fluid.
Electrical check over, ground cleaning and 14 pin connector check.
Timing / Water pump replace refresh and timing done with Ken's set up:
New fuel pump and relay.
Engine mounts, tranny mounts, PKlamp.
On request of the kids, RMB installed.
Front crash sensor connector clean and clear error code.
Intake refresh, new sensors all 'round, Ford "Three hole" injectors and a powder coating to make me feel better when I look at it..
Rad flush/rebuild with new tank and gaskets. New recovery tank.
Rebuilt fan motors with custom made brushes from local shop...OK, I screwed up this one. One fan not operating now...on the schedule.
Just finished the TT rebuild (New "Super Bearings" and a "Super Clamp" set up from Black Sea R&D) and install. - Gotta kiss some serious butt for all the input and great help and experience on this forum. Dwayne is unbelieveable as a published resource.
New Biltstein/Eibach set up in the garage waiting for install, along with brake upgrades.
We havin' fun yet? Wait, on second set of tires, made it down to and back from SITM last year...and there are few to be seen....yep, havin' fun.
And, IMHO, it still looks dicey from 20 feet. But, one of these fine days.....![cherrsagai](https://rennlist.com/forums/graemlins/drink.gif)
.
![banghead](https://rennlist.com/forums/graemlins/banghead.gif)
Mechanicals are getting there though!
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
And, that's said now after the following:
New pads, rotors, sensors, fluid flush.
PSD flush and fill.
Differential flush and fill;
Trans filter, gaskets and fresh fluid.
Electrical check over, ground cleaning and 14 pin connector check.
Timing / Water pump replace refresh and timing done with Ken's set up:
New fuel pump and relay.
Engine mounts, tranny mounts, PKlamp.
On request of the kids, RMB installed.
Front crash sensor connector clean and clear error code.
Intake refresh, new sensors all 'round, Ford "Three hole" injectors and a powder coating to make me feel better when I look at it..
Rad flush/rebuild with new tank and gaskets. New recovery tank.
Rebuilt fan motors with custom made brushes from local shop...OK, I screwed up this one. One fan not operating now...on the schedule.
Just finished the TT rebuild (New "Super Bearings" and a "Super Clamp" set up from Black Sea R&D) and install. - Gotta kiss some serious butt for all the input and great help and experience on this forum. Dwayne is unbelieveable as a published resource.
New Biltstein/Eibach set up in the garage waiting for install, along with brake upgrades.
We havin' fun yet? Wait, on second set of tires, made it down to and back from SITM last year...and there are few to be seen....yep, havin' fun.
And, IMHO, it still looks dicey from 20 feet. But, one of these fine days.....
![cherrsagai](https://rennlist.com/forums/graemlins/drink.gif)
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
#48
Rest in Peace
Rennlist Member
Rennlist Member
Join Date: May 2006
Location: Bird lover in Sharpsburg
Posts: 9,903
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I hear ya, I am not there yet either.
I'm three years in on mine, and the cosmetics are still waiting.......![banghead](https://rennlist.com/forums/graemlins/banghead.gif)
Mechanicals are getting there though!![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
And, that's said now after the following:
New pads, rotors, sensors, fluid flush.
PSD flush and fill.
Differential flush and fill;
Trans filter, gaskets and fresh fluid.
Electrical check over, ground cleaning and 14 pin connector check.
Timing / Water pump replace refresh and timing done with Ken's set up:
New fuel pump and relay.
Engine mounts, tranny mounts, PKlamp.
On request of the kids, RMB installed.
Front crash sensor connector clean and clear error code.
Intake refresh, new sensors all 'round, Ford "Three hole" injectors and a powder coating to make me feel better when I look at it..
Rad flush/rebuild with new tank and gaskets. New recovery tank.
Rebuilt fan motors with custom made brushes from local shop...OK, I screwed up this one. One fan not operating now...on the schedule.
Just finished the TT rebuild (New "Super Bearings" and a "Super Clamp" set up from Black Sea R&D) and install. - Gotta kiss some serious butt for all the input and great help and experience on this forum. Dwayne is unbelieveable as a published resource.
New Biltstein/Eibach set up in the garage waiting for install, along with brake upgrades.
We havin' fun yet? Wait, on second set of tires, made it down to and back from SITM last year...and there are few to be seen....yep, havin' fun.
And, IMHO, it still looks dicey from 20 feet. But, one of these fine days.....![cherrsagai](https://rennlist.com/forums/graemlins/drink.gif)
.
![banghead](https://rennlist.com/forums/graemlins/banghead.gif)
Mechanicals are getting there though!
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
And, that's said now after the following:
New pads, rotors, sensors, fluid flush.
PSD flush and fill.
Differential flush and fill;
Trans filter, gaskets and fresh fluid.
Electrical check over, ground cleaning and 14 pin connector check.
Timing / Water pump replace refresh and timing done with Ken's set up:
New fuel pump and relay.
Engine mounts, tranny mounts, PKlamp.
On request of the kids, RMB installed.
Front crash sensor connector clean and clear error code.
Intake refresh, new sensors all 'round, Ford "Three hole" injectors and a powder coating to make me feel better when I look at it..
Rad flush/rebuild with new tank and gaskets. New recovery tank.
Rebuilt fan motors with custom made brushes from local shop...OK, I screwed up this one. One fan not operating now...on the schedule.
Just finished the TT rebuild (New "Super Bearings" and a "Super Clamp" set up from Black Sea R&D) and install. - Gotta kiss some serious butt for all the input and great help and experience on this forum. Dwayne is unbelieveable as a published resource.
New Biltstein/Eibach set up in the garage waiting for install, along with brake upgrades.
We havin' fun yet? Wait, on second set of tires, made it down to and back from SITM last year...and there are few to be seen....yep, havin' fun.
And, IMHO, it still looks dicey from 20 feet. But, one of these fine days.....
![cherrsagai](https://rennlist.com/forums/graemlins/drink.gif)
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
#49
Rennlist Member
Join Date: Feb 2008
Location: Lillington, NC
Posts: 2,742
Likes: 0
Received 0 Likes
on
0 Posts
#55
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yes the comments were pretty much on the sharp end and it would be a shame if he wouldn't hang around. I would like to see some pictures of his car anyway.
#56
Race Car