AO

I had the oil cooler lines rebuilt for my 928 in an attempt to save a buck or two. Well I think it has backfired on me. The place made them just a bit too long and there is so much stress on things getting them into position, that I think this is causing my leak where the line mate with the oil cooler.

Does anyone have a set of good old hoses off a 90+ S4/GT/GTS (remember the GT has the separate oil cooler) that they'd be willing to sell?
Let me know.

I will either install them, or take them in with the rebuilts back to the shop and have them make it right.

Thanks.

928 at last

Did you check with Greg? He's parting out a '90 as we speak.

GregBBRD

I gather up as many "cores" for these lines that I can find, to fabricate replacement hose sets made from Goodridge Teflon Hose. If you need to borrow a set of old lines, I can look around and see if I have a set that is still intact.

AO

Thanks guys. I should have looked before posting. Turns out the lines were not the source of my leak. I either popped the dipstick or hadn't seated it all the way down. So I was somewhat pleasantly surprised to see the oil cooler and lines were fine (even thought the top one is a tad too long). Closing thread

hacker-pschorr