WOOT! It'll be on the truck tomorrow!
02-15-2011 | 10:31 PM
#16
Rennlist Member
Joined: Mar 2010
Posts: 2,538
Likes: 312
From: Holden Beach and Winston-Salem, North Carolina 82 928 Euro S 5spd MOSS GREEN/CHAMPAGNE-04 996 C4S CONV TIP POLAR SILVER/METROPOL BLUE
02-15-2011 | 10:59 PM
#18
Rennlist Member
Joined: Jul 2010
Posts: 994
Likes: 25
From: Mukilteo, Wa.
Thomas
02-15-2011 | 11:07 PM
#20
Rennlist Member
Joined: May 2002
Posts: 1,109
Likes: 110
From: Virginia Beach, VA
Now that is a clean looking shark. The interior looks particularly nice. Well done.
If you want to get rims, recommend Roger's, a set of Carerra IIIs, or go with Cup I 17s for the classic look.
If you want to get rims, recommend Roger's, a set of Carerra IIIs, or go with Cup I 17s for the classic look.
02-15-2011 | 11:17 PM
#22
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Jan 2003
Posts: 16,839
Likes: 897
From: Double Oak, TX
They look very similar but are 17". The Panamera wheels are 19" IIRC.
$800 for the set of 4 - 3 are near perfect but one has a little curb rash that will polish out. From 6' you can't see the rash.
If they do not sell I may but them on my 89 - 5 SPEED. That has a set of Cup II on it.
$800 for the set of 4 - 3 are near perfect but one has a little curb rash that will polish out. From 6' you can't see the rash.
If they do not sell I may but them on my 89 - 5 SPEED. That has a set of Cup II on it.
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
02-16-2011 | 09:38 AM
#29
Rennlist Member
Joined: Apr 2006
Posts: 35,700
Likes: 503
I can tell from the engine picture that you will be needing a top end refresh in the future. Knock sensors are original, and that tells me the Hal sensor has not been changed also.
When it gets here, let's put the Bosch Hammer on it and read the computer and find out if everything is working.
When it gets here, let's put the Bosch Hammer on it and read the computer and find out if everything is working.
