Front wheel ABS sensor part# is confusing
#1
Instructor
Thread Starter
Front wheel ABS sensor part# is confusing
I'm confused I own a 1986 Porsche 928 32v with the smaller brakes VIN<1000
It seems like there are 3 different part numbers for the front wheel ABS sensors. 928 606 404 00, 928 606 404 01 , and 928 606 404 02. My original front wheel sensor shows a 0 265 001 054 a Bosch or Audi part. On ebay they all fit but I was told that mine has 90 teeth and the S4 has 45. Any Ideas?
1986 Porsche 928 32v not 1986.5
It seems like there are 3 different part numbers for the front wheel ABS sensors. 928 606 404 00, 928 606 404 01 , and 928 606 404 02. My original front wheel sensor shows a 0 265 001 054 a Bosch or Audi part. On ebay they all fit but I was told that mine has 90 teeth and the S4 has 45. Any Ideas?
1986 Porsche 928 32v not 1986.5
#2
Nordschleife Master
IIRC, the early ABS sensor (pre-86.5 in the USA) is NLA.
Check with one of the parts vendors to make sure of that, but I think your options are to fit a used sensor, repair your existing one, or disable the ABS warning light and run without ABS.
Check with one of the parts vendors to make sure of that, but I think your options are to fit a used sensor, repair your existing one, or disable the ABS warning light and run without ABS.
#3
Instructor
Thread Starter
There are plenty of used ones online part# 928 606 404 01 that fits 944 and 928s should I take a chance on those. It kinda looks like mine. Disabling the ABS by fuse or relay?