Timing belt help needed
#16
Diehard. Check out Dwayne's writeup on his timing belt and WP job. Great info with lots of pics. Not sure if you have seen it yet or not.
http://dwaynesgarage.norcal928.org/1...0Procedure.htm
http://dwaynesgarage.norcal928.org/1...0Procedure.htm
#17
Intermediate
Thread Starter
Yes, excellent details!
I have seen that one, thanks! It is the only reason I have gotten as far as I have, I studied it in depth before I even started so I would remember all the items to look out for and have referenced it 5-6 times today as well.
Regarding the WP, I have bought a new Laso with the plastic impeller from 928 specialists just two weeks ago. Is this not the latest???
Thanks,
Diehard
Regarding the WP, I have bought a new Laso with the plastic impeller from 928 specialists just two weeks ago. Is this not the latest???
Thanks,
Diehard
#18
Three Wheelin'
You should at least read about an aftermarket tensioner update by 'Porken' called the Porkentensioner while you are at it.
New Laso with plastic impeller is fine and improved over the metal impeller. They improved the design and is the latest. Also note worthy is an aftermarket improvement done by a member here and sold by Roger. Give him a call!
Good catch on the WP failure.
New Laso with plastic impeller is fine and improved over the metal impeller. They improved the design and is the latest. Also note worthy is an aftermarket improvement done by a member here and sold by Roger. Give him a call!
Good catch on the WP failure.