Rebuilt the engine harness
#1
Thread Starter
Rebuilt the engine harness
So i decided to rebuild my crumbling harness.. i used TLX wire and Silicone/Fiberglass sleeve to protect it from heat and oil. And new connectors.
#2
Under the Lift
Lifetime Rennlist
Member
Lifetime Rennlist
Member
That's some work. What was your source for the connectors? Just handling the 14-pin connector if the top comes off and all the pins come out is fun, let alone wiring a new one.
#5
Nordschleife Master
Carl sells a front harness, was it worth the time etc to do your own?
I've been looking at making new harnesses for some time, front and both brains, but haven't gotten started yet waiting on other products etc. Turns out one of my surplus dealer friends has a bunch of teflon aerospace wire in some variety of colors, so I may finally get going on them, but its a task that begs for a jig etc and doing several.
I've been looking at making new harnesses for some time, front and both brains, but haven't gotten started yet waiting on other products etc. Turns out one of my surplus dealer friends has a bunch of teflon aerospace wire in some variety of colors, so I may finally get going on them, but its a task that begs for a jig etc and doing several.
#7
I am assuming that when you buy these connectors you have to buy them by the box so if anyone is going to do this and try to build a few extra to cover thier costs let me know I'm interested.
Thanks
Matt
Thanks
Matt
Trending Topics
#11
Drifting