Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

Yea! Finally found a good deal on a windshield

Thread Tools
 
Search this Thread
 
Old 05-06-2010 | 11:14 PM
  #16  
jpNcos's Avatar
jpNcos
Burning Brakes
 
Joined: Mar 2008
Posts: 930
Likes: 0
From: At the foot of Pikes Peak
Default

I'm in the Springs and could use a windshield. Who is the shop? Do they have more? Maybe we could work a deal on 2 of them.
Old 05-06-2010 | 11:30 PM
  #17  
gearz's Avatar
gearz
Rennlist Member
 
Joined: Nov 2009
Posts: 247
Likes: 2
From: The Mountains, WA
Default

Call Richard @ PROSOURCE GLASS INTERNATIONAL
(978) 975-5400

I got a SIGLA w/antenna, upper tint band and the black band around the border from him for my '88 S4. It was about $500 which included crating and shipping it to me from the east coast. Paid $150 to have it installed. The acual cost was under $400 for the windshield alone. The new WS is wonderful!


A local windshield shop quoted me $2100 to have the same windshield installed....
Old 05-06-2010 | 11:52 PM
  #18  
Calgary Ole's Avatar
Calgary Ole
 
Joined: Feb 2009
Posts: 914
Likes: 3
From: Calgary Canada
Default

Would any of my fellow Canadians know where I could get a windshield, sounds like I couldn't have one shipped across the border like I was hoping.
Old 05-07-2010 | 05:21 PM
  #19  
SQLGuy's Avatar
SQLGuy
Thread Starter
Three Wheelin'
 
Joined: Mar 2010
Posts: 1,307
Likes: 3
From: Colorado Springs, CO USA
Default

The new glass is being installed now. It's a green band Sigla with no antenna. I've emailed Roger for some details on adding the bee sting.

Cheers,
Paul
Old 05-07-2010 | 08:56 PM
  #20  
SQLGuy's Avatar
SQLGuy
Thread Starter
Three Wheelin'
 
Joined: Mar 2010
Posts: 1,307
Likes: 3
From: Colorado Springs, CO USA
Default

Well, it's in. The new windshield looks good, and the tech tells me that the new urethane adhesive should be a lot better than the original butyl. The down side is that the top trim got pretty dinged up in the process. I expect that this, like the corner moldings on the door ledge seals, is one of those pieces that's designed to be replaced rather than reused?
Attached Images  
Old 05-07-2010 | 09:07 PM
  #21  
Bill Ball's Avatar
Bill Ball
Under the Lift
Lifetime Rennlist
Member
 
Joined: Mar 2002
Posts: 18,647
Likes: 49
From: Buckeye, AZ
Default

Originally Posted by SQLGuy
Well, it's in. The new windshield looks good, and the tech tells me that the new urethane adhesive should be a lot better than the original butyl. The down side is that the top trim got pretty dinged up in the process. I expect that this, like the corner moldings on the door ledge seals, is one of those pieces that's designed to be replaced rather than reused?
Yes, the original butyl rope system is outmoded. Urethane bead should work great, although it can be sloppy unless the guy is real good at laying down a consistent bead. The moldings should survive if the guy understands the way they are clipped, but I had the same experience.
Old 05-08-2010 | 01:41 PM
  #22  
Big Easy Sharkster's Avatar
Big Easy Sharkster
Rennlist Member
 
Joined: Nov 2004
Posts: 333
Likes: 8
From: Tampa, Fla
Default

My only problem with the $300 winshield was that the black trim along the bottom didn't come up high enough to block out (or mask) the off color felt on the leading edge of the dash
Old 05-08-2010 | 02:34 PM
  #23  
Franks928s's Avatar
Franks928s
Instructor
 
Joined: Jul 2009
Posts: 212
Likes: 0
Default

SQLGUY - what do you mean by "Beesting?"
Old 05-08-2010 | 02:50 PM
  #24  
SQLGuy's Avatar
SQLGuy
Thread Starter
Three Wheelin'
 
Joined: Mar 2010
Posts: 1,307
Likes: 3
From: Colorado Springs, CO USA
Default

The little roof-mounted antenna used on '89's and later.
Old 06-10-2010 | 09:42 AM
  #25  
Jadz928's Avatar
Jadz928
Rennlist Member
 
Joined: May 2003
Posts: 8,693
Likes: 137
From: Frankenmuth, Michigan
Default

Originally Posted by gearz
Call Richard @ PROSOURCE GLASS INTERNATIONAL
(978) 975-5400

I got a SIGLA w/antenna, upper tint band and the black band around the border from him for my '88 S4. It was about $500 which included crating and shipping it to me from the east coast. Paid $150 to have it installed. The acual cost was under $400 for the windshield alone. The new WS is wonderful!


A local windshield shop quoted me $2100 to have the same windshield installed....
What gearz says....

Richard @ Prosource was great!
Attached Images  
Old 06-10-2010 | 04:56 PM
  #26  
Richard Lang's Avatar
Richard Lang
Addict
Rennlist Member

 
Joined: Jan 2003
Posts: 314
Likes: 0
From: Phoenix AZ
Default

Just replaced my 83 windshield in Phoenix / was also the sigla with green tint.
The kid installing it was great he took the time to remove molding with out damage and replaced it with no damage and used the new seal, Looks good and only cost 358.
Old 07-27-2010 | 11:01 AM
  #27  
blitz928's Avatar
blitz928
Race Car
 
Joined: Apr 2006
Posts: 4,772
Likes: 2
From: South Florida
Default

Originally Posted by gearz
Call Richard @ PROSOURCE GLASS INTERNATIONAL
(978) 975-5400

I got a SIGLA w/antenna, upper tint band and the black band around the border from him for my '88 S4. It was about $500 which included crating and shipping it to me from the east coast. Paid $150 to have it installed. .
I'm trying them now, I've had no luck with the 2 windshields I've ordered through Brumos from Germany. 3 weeks to ship and both came in broken. My local glass guy agreed that I can order the windshield and he can install.

Last edited by blitz928; 07-27-2010 at 11:33 AM.



Quick Reply: Yea! Finally found a good deal on a windshield



All times are GMT -3. The time now is 04:55 AM.