Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

S4 HVAC Control Motor Arm and Rod Needed

Thread Tools
 
Search this Thread
 
Old 04-22-2010, 12:58 PM
  #1  
Espritman
Advanced
Thread Starter
 
Espritman's Avatar
 
Join Date: Mar 2007
Location: Annapolis, Maryland USA
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
Default S4 HVAC Control Motor Arm and Rod Needed

After receiving back the rebuilt heater control motor from JDS Porsche for my '88 S4, I discovered that 2 of the small parts removed before shipping have vanished. The parts I need are the small arm (3"?) that bolts to the side of control motor and the adjustable rod that attaches to that arm. There's an illustration of the motor and needed parts on page 87-43 of volume 4 of the Workshop Manual. My WSM is the 1980 version so it shows the rod with no thread adjustments that mine requires.
These small items are making useless my heater and AC. Your support will be rewarded with heaps of praise AND some cash.
Thanks 'guys',
Bob
'88 S4

Last edited by Espritman; 04-23-2010 at 01:01 PM. Reason: Problem solved. Please remove.



Quick Reply: S4 HVAC Control Motor Arm and Rod Needed



All times are GMT -3. The time now is 09:47 AM.