Fuel Line Leak
#16
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Don,
See I learn something new every day. I knew it was lower but did not know it was as low as 30psi.
Why so low?
Roger
See I learn something new every day. I knew it was lower but did not know it was as low as 30psi.
Why so low?
Roger
__________________
![](https://cdn.shopify.com/s/files/1/1694/8685/files/928sRus_rennlist.png?v=1621798567)
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
![](https://cdn.shopify.com/s/files/1/1694/8685/files/928sRus_rennlist.png?v=1621798567)
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
#17
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Actually 30-36 I think is normal for my car. 30 was at idle. Ken explained all the variables over on the PorChip thread this morning. It's all over my head. I hear "blah, blah, blah, vacuum, blah, blah, temperatures, blah, blah..."
#18
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My 2 cents worth.
The anti seize is just that, anti-seize, just as Stan has said and Bill has advised to check the sealing faces. If you follow their advise it should seal.
Telfon tape only seals when the threads of the union are the actual sealing faces.
I you do as sugggested you will reduce the friction between the thread faces and the end of the nut where if fits onto the collar of the joint piece. With the reduced friction you will obtain more force applied axially onto the actual joint faces.
Tails 1990 928S4 Auto
The anti seize is just that, anti-seize, just as Stan has said and Bill has advised to check the sealing faces. If you follow their advise it should seal.
Telfon tape only seals when the threads of the union are the actual sealing faces.
I you do as sugggested you will reduce the friction between the thread faces and the end of the nut where if fits onto the collar of the joint piece. With the reduced friction you will obtain more force applied axially onto the actual joint faces.
Tails 1990 928S4 Auto
#20
Three Wheelin'
Thread Starter
Join Date: Jan 2010
Location: Muriland
Posts: 1,382
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks to all who helped out with the leak in the fuel line off the fuel cooler. I added some anti-seize to the threads and tightened, pressurized the system, and so far no leaks.
Last edited by aaddpp; 07-18-2011 at 05:20 PM.