Call me a wimp, but . .
#16
Its not for everyone - but laid out on the ground, pointed away from important people/things, it works just fine. No need for alarm.
#17
Come on greg - I'm not releasing the damn thing near me, pointed at me, or at my damn face. Its parallel to the ground, etc.
The compressors I have used scared the **** out of me, so I do it this way.
The compressors I have used scared the **** out of me, so I do it this way.
Wow, I just do not even know where to start with that.
I will say I know one guy that has brain damage from doing what you are recommending.
BTW, the Snap on's and every other one I have ever used were forged.
In addition to my wall mount I have three other sets, all forged.
I will say I know one guy that has brain damage from doing what you are recommending.
BTW, the Snap on's and every other one I have ever used were forged.
In addition to my wall mount I have three other sets, all forged.
#18
Rest in Peace
Rennlist Member
Rennlist Member
Join Date: May 2006
Location: Bird lover in Sharpsburg
Posts: 9,903
Likes: 0
Received 2 Likes
on
2 Posts
That is just stupid to say compressors scare you so you are not going to use one.
I have ZERO problems with you doing that, just do not put others in danger by making them think it is safe, I know it is not.
#19
Rennlist Member
c'mon greg, uncle mitch might be a little slow, but sayin he has damage seems a little harsh. At the very least, don't blame a spring.
#20
Rest in Peace
Rennlist Member
Rennlist Member
Join Date: May 2006
Location: Bird lover in Sharpsburg
Posts: 9,903
Likes: 0
Received 2 Likes
on
2 Posts
How else can you explain the fact that I found him marching, in the privacy of his own garage, marching to John Phillips Suza music, in his own garage, ALONE on a sunny Sunday morning?
#22
Nordschleife Master
This thread is funny.
I wonder if I should admit to doing it the same way as Brendan.......
Although I do it in the shop or garage, put the assembly parallel to the ground, put one foot on the spring with mild weight on it, and then use an impact gun to pop off the nut on the top.
The top of the assembly moves maybe 6" and the shock shoots out the bottom of the spring and moves maybe 1.5'.
The 928 springs are only around 200# and really arent compressed that much so the built up energy is not that great.
I would love to have a wall mount compressor, but dont have one yet. Using all other forms of compressors tend to be a PITA getting the units apart with them.
I am not saying I agree with this method for most people, but for some it can be done with very low associated risks.
#23
Rest in Peace
Rennlist Member
Rennlist Member
Join Date: May 2006
Location: Bird lover in Sharpsburg
Posts: 9,903
Likes: 0
Received 2 Likes
on
2 Posts
Nothing funny about it to me.
This thread is funny.
I wonder if I should admit to doing it the same way as Brendan.......
Although I do it in the shop or garage, put the assembly parallel to the ground, put one foot on the spring with mild weight on it, and then use an impact gun to pop off the nut on the top.
The top of the assembly moves maybe 6" and the shock shoots out the bottom of the spring and moves maybe 1.5'.
The 928 springs are only around 200# and really arent compressed that much so the built up energy is not that great.
I would love to have a wall mount compressor, but dont have one yet. Using all other forms of compressors tend to be a PITA getting the units apart with them.
I am not saying I agree with this method for most people, but for some it can be done with very low associated risks.
This thread is funny.
I wonder if I should admit to doing it the same way as Brendan.......
Although I do it in the shop or garage, put the assembly parallel to the ground, put one foot on the spring with mild weight on it, and then use an impact gun to pop off the nut on the top.
The top of the assembly moves maybe 6" and the shock shoots out the bottom of the spring and moves maybe 1.5'.
The 928 springs are only around 200# and really arent compressed that much so the built up energy is not that great.
I would love to have a wall mount compressor, but dont have one yet. Using all other forms of compressors tend to be a PITA getting the units apart with them.
I am not saying I agree with this method for most people, but for some it can be done with very low associated risks.