Garage clean out - OEM 928 cove,r Kempf tool kit, window switches, etc...
#16
Addict
Rennlist Member
Rennlist Member
Thread Starter
Hello again guys,
Thanks for the responses.
OK...
mcholdfast, you wanted the pan gasket injector, and switches. Please shoot me a PM with your address, and I will get the shipping amount.
Glenn, so you are OK with the reviews of the elbows? Sound like you know what the other guys are saying, but I don't want to sell it to you unless you can make it work out good in the end? I believe Roger had good fittings for vac lines if needed. If you still want it, Please shoot me a PM with your address, and I will get the shipping amount.
Tom in Austin, The GTS air tubes are yours. I don't think the shipping will be that bad. Please shoot me a PM with your address, and I will get the shipping amount.
BIMMERMIKE, Hi Mike. Hope you and that "pristine S" of yours are well man. My current ride is waiting to go to the paint both, so I'm not sure when i can make a cruise. I will be there when it is all together though. Now if you want to cruise on a tractor, I have a few up here you can cruise with me on ;
Cosmo, I gave you a call, and left a message. I will try again later on. I was hoping to see if you had the time to show off your SC'er over the holidays, but it was just too busy for me to get away.
Malcolm, I will keep you in mind.
antsmands, you can either go trough ebay, or shoot me a PM and I will get you the shipping.
Cheers all,
Michael
Thanks for the responses.
OK...
mcholdfast, you wanted the pan gasket injector, and switches. Please shoot me a PM with your address, and I will get the shipping amount.
Glenn, so you are OK with the reviews of the elbows? Sound like you know what the other guys are saying, but I don't want to sell it to you unless you can make it work out good in the end? I believe Roger had good fittings for vac lines if needed. If you still want it, Please shoot me a PM with your address, and I will get the shipping amount.
Tom in Austin, The GTS air tubes are yours. I don't think the shipping will be that bad. Please shoot me a PM with your address, and I will get the shipping amount.
BIMMERMIKE, Hi Mike. Hope you and that "pristine S" of yours are well man. My current ride is waiting to go to the paint both, so I'm not sure when i can make a cruise. I will be there when it is all together though. Now if you want to cruise on a tractor, I have a few up here you can cruise with me on ;
Cosmo, I gave you a call, and left a message. I will try again later on. I was hoping to see if you had the time to show off your SC'er over the holidays, but it was just too busy for me to get away.
Malcolm, I will keep you in mind.
antsmands, you can either go trough ebay, or shoot me a PM and I will get you the shipping.
Cheers all,
Michael
#17
Addict
Rennlist Member
Rennlist Member
Thread Starter
BTW I figured I might as well show this beautiful sign i have for sale locally. I was hoping to see someone close by jump on this, but just nibbles so far.
I have not had the chance to get the sign "in crate" weighed yet (I don't know how), but as soon as I can figure something out, I can get USA shipping quotes.
Here is the For Sale post................
I have a very rare Porsche Dealership sign for sale. Maybe from the mid 80’s.
Sign is 6 foot by 6 foot, with light fixtures, and box.
I purchased 2 of these signs (front and back) from a shop in the parries this summer. I built proper boxes for the signs, and installed 4 48” florescent strip lights (just like the originally had). The signs have a standard switch on the bottom of the frame, and can either be wired up to your garage circuit, or just plugged into an extension cord. The signs were originally with a white frame, but I thought they looked much nicer with a black frame so I painted the frames gloss black.
I finally got around to mounting up one of the signs last week.
IT LOOKS AMAZING!
I was planning on putting the other sign up on the other wall of my garage, but I have realized that I need that wall space for large tools, ladders, etc, so I have decided to see if someone wants to buy my other sign.
The signs are in excellent shape with no damage. Amazing for their age. The Porsche crests are perfect. I wanted to give the Plexiglas a real good scrub, but I did not have the time. I’ll do that in the spring.
The signs have shipping crates, but I will not have the time to look into shipping until mid Jan at the earliest. So I would like to offer one of these signs to someone for pick-up just east of Cambridge Ontario, or I could deliver in T.O. for $50, or the surrounding areas for $100.
Price is $3000. That may seem like a lot, but this sign is HUGE and very impressive, you will not find these anywhere (and I have looked), and if I smashed one of them with a ladder or something I would not sell the other for $5K.
Feel free to ask any questions……with the exception of shipping quotes. I don’t have the time for that legwork yet.
Thanks,
Michael
Here is one with unpainted frame (white) with the shipping crate...
I have not had the chance to get the sign "in crate" weighed yet (I don't know how), but as soon as I can figure something out, I can get USA shipping quotes.
Here is the For Sale post................
I have a very rare Porsche Dealership sign for sale. Maybe from the mid 80’s.
Sign is 6 foot by 6 foot, with light fixtures, and box.
I purchased 2 of these signs (front and back) from a shop in the parries this summer. I built proper boxes for the signs, and installed 4 48” florescent strip lights (just like the originally had). The signs have a standard switch on the bottom of the frame, and can either be wired up to your garage circuit, or just plugged into an extension cord. The signs were originally with a white frame, but I thought they looked much nicer with a black frame so I painted the frames gloss black.
I finally got around to mounting up one of the signs last week.
IT LOOKS AMAZING!
I was planning on putting the other sign up on the other wall of my garage, but I have realized that I need that wall space for large tools, ladders, etc, so I have decided to see if someone wants to buy my other sign.
The signs are in excellent shape with no damage. Amazing for their age. The Porsche crests are perfect. I wanted to give the Plexiglas a real good scrub, but I did not have the time. I’ll do that in the spring.
The signs have shipping crates, but I will not have the time to look into shipping until mid Jan at the earliest. So I would like to offer one of these signs to someone for pick-up just east of Cambridge Ontario, or I could deliver in T.O. for $50, or the surrounding areas for $100.
Price is $3000. That may seem like a lot, but this sign is HUGE and very impressive, you will not find these anywhere (and I have looked), and if I smashed one of them with a ladder or something I would not sell the other for $5K.
Feel free to ask any questions……with the exception of shipping quotes. I don’t have the time for that legwork yet.
Thanks,
Michael
Here is one with unpainted frame (white) with the shipping crate...
#19
Addict
Rennlist Member
Rennlist Member
Thread Starter
Hello all,
Just an update. Injector, base pan gasket, and window switches, sold to mcholdfast. Mike, these shipped last week.
Vac lines sold to Glenn M. Glenn, these hoses also went out last week.
Kempf tool kit sold on ebay.
Car cover still on ebay.
Tom, I'm sorry but I missed you post. If you still want those rough GTS air tubes, I can check to see what the shipping will be to you in Austin.
Cheers,
Michael
Just an update. Injector, base pan gasket, and window switches, sold to mcholdfast. Mike, these shipped last week.
Vac lines sold to Glenn M. Glenn, these hoses also went out last week.
Kempf tool kit sold on ebay.
Car cover still on ebay.
Tom, I'm sorry but I missed you post. If you still want those rough GTS air tubes, I can check to see what the shipping will be to you in Austin.
Cheers,
Michael
#20
Captain Obvious
Super User
Super User
Hello all,
Just an update. Injector, base pan gasket, and window switches, sold to mcholdfast. Mike, these shipped last week.
Vac lines sold to Glenn M. Glenn, these hoses also went out last week.
Kempf tool kit sold on ebay.
Car cover still on ebay.
Tom, I'm sorry but I missed you post. If you still want those rough GTS air tubes, I can check to see what the shipping will be to you in Austin.
Cheers,
Michael
Just an update. Injector, base pan gasket, and window switches, sold to mcholdfast. Mike, these shipped last week.
Vac lines sold to Glenn M. Glenn, these hoses also went out last week.
Kempf tool kit sold on ebay.
Car cover still on ebay.
Tom, I'm sorry but I missed you post. If you still want those rough GTS air tubes, I can check to see what the shipping will be to you in Austin.
Cheers,
Michael
Do you have any other tools/parts for sale?
#23
Three Wheelin'
Join Date: Mar 2006
Location: Happy To Be Home in Sumter, SC
Posts: 1,489
Likes: 0
Received 1 Like
on
1 Post
Nah, I wish. I'd love to have that in the garage. I did get a great deal on some other smaller goodies though. Just letting Michael know everything delivered intact and in great condition.