Kibort racer conversion excess parts sale
#17
Rennlist Member
Thread Starter
I ended up buying the car from Mark. But, I'm indebted to him for all his help well over the call of duty!. There is not much left of the donor car, just some odds and ends. If the new Holbert car needs any of it, Ed is certainly welcome to it.
mk
mk
#18
Addict
Rennlist Member
Rennlist Member
Mark if the drivers side front fender liner is available I would be interested. Looks like Heinrich was looking for some but not sure if he wanted all of them. It needs to be crack free to work for my requirements.
Thanks.
Thanks.
#21
Rennlist Member
Thread Starter
#24
Rennlist Member
Thread Starter
You got it!
One of the early requesters sent a check for the fenderliners, cassette box, and sunroof switch and center consol with temp sensor.
rear center glove box gone too.
someone better grab the ceiling, before I tear it out and possibly damage it. (and better tell me how to remove it too )
mk
One of the early requesters sent a check for the fenderliners, cassette box, and sunroof switch and center consol with temp sensor.
rear center glove box gone too.
someone better grab the ceiling, before I tear it out and possibly damage it. (and better tell me how to remove it too )
mk
#25
Rennlist Member
Thread Starter
anyone want the front incoming radiator air vent control system with motor (actuator)? it looks like its in perfect shape and I want to know if I need to be careful during its pull out. this is the system that opens and closes the vents at the mouth of the car, under the nose.
thanks,
mark
thanks,
mark
#26
Archive Gatekeeper
Rennlist Member
Rennlist Member
Did the Holbert car have the ducting from that area? While I would of course lose the flap motor and remove the shutters, I think I'd want to keep the frame there so the ducting from the front grille can be retained- Seems there have been a few posts about people with overheating issues lately whose ductwork had slipped out of the clips on the front bumper cover. You want all the air you can forced thru the radiator, hence the ductwork, the blockoff plates at the sides of the rad, the sealing foam, etc.
Or maybe not, I dunno.
Pics of the mod:
https://rennlist.com/forums/928-foru...-question.html
Or maybe not, I dunno.
Pics of the mod:
https://rennlist.com/forums/928-foru...-question.html
#28
Rennlist Member
Thread Starter