5.0L HYBRID AND EURO S GOODIES FOR SALE!!
10-17-2009, 01:11 PM
#1
Three Wheelin'
Thread Starter
Join Date: Sep 2006
Location: Banished to the SBC Wastelands
Posts: 1,578
Likes: 0
Received 4 Likes
on
3 Posts
5.0L HYBRID AND EURO S GOODIES FOR SALE!!
Well I have finally decided to go with a full blown stroker from Carl. It's to be my winter project. I'm tired of local Auto X and DE days and want to play with the big boys. So the Hybrid is coming out. A stroker and roll cage are going in. I'm loosing the CIS as well, going with stand alone and an 84 Euro S intake. Keeping my big cams and having a set of heads being worked with bigger valves.
I think the sum of the parts may be worth more than the whole Engine so I'll list it both ways. Going on ebay tonight and the Rennlist for sale area. Engine is running VERY strong right now. I'm pulling the engine this weekend and expect to have it apart by next for shipping. ebay auctions will run through next Saturday. Prices here are below reserve so let me know before the auction ends if you want something. If any prices are out of line, please let me know, I tried to come in well under closed ebay auction prices but not everything could be researched easily.
Let me know if any of this peeks your interest:
Euro S heads - $400 for pair, in great shape. SOLD
Euro S cams (Stock Euro S cams not my regrinds) - $400 Come with boxes, lifters and '85 cam gears. SOLD
Euro S intake w/ CIS injectors - $150 Painted Yellow with red boots. Paint comes of easily. Also comes with stonger, larger collar boot for TB connection. ON HOLD
Euro S throttle Body (Needs work) - $25
Fly Cut '85 pistons for 16v : Tolerance group One, which seems to be the most common block type - $150
5-speed flywheel - SOLD - Going to DanglerB
8 Braided SS 3an fuel lines for CIS -$200 Carl's kit cost $1200!! SOLD
Complete CIS system just rebuilt with new o-rings - $250. Includes everything, fuel distributor, lower S plenum, damper, all hard lines. NO WUR!! SOLD
WUR Rebuilt and cleaned last 3 months $125 for 80-83 model, not sure if it will work for '78-79 model. Heat circuit on bimetallic strip is different. SOLD
MSD Billet 928 Distro w/Magnicore wires (Can't get from MSD..) $300 It's like buying the wires new and getting a free billet Distro. Distro has magnetic pickup for most accurate timing you can have on an early shark. Adjustable advance curves for fine tuning. SOLD
MSD 6AL ignition - $125 with rev limit and extra pills. Will throw in Accel HO coil as well. Hooks up to the distro with one wire. More power to the plugs. Great combo with the distro, magnicore and accel coil. SOLD
MSDS Headers - $200 Painted with Yellow Exhaust paint. Not jet coating. Not new but very functional, no leaks. SOLD
175a Alternator (Bosche casing) $150 Maybe 5K miles since built. After market kit, paid over $350 to have done. Will run serious electronics and stereo with decent idle output. SOLD
Stock Alternator - SOLD
2x starters $50 -One SOLD
78 cams $150 with boxes, lifters and stock cam gears. take 1mm off with a base circle grind and have a great cam for boost. Less overlap than the bigger S cams. SOLD
77-82 Brand New timing belt, never installed. - $25 SOLD
Piston set for 4.5L decent shape, clean no carbon build up. - $100 includes circlips and pin bushing. I'd replace the circlips as best practice but their there...
2 complete Rod sets for 4.5, 4.7 and 5.0L. Should work for all 86 and before. $75 each.
78 heads $100 for pair. Need nothing.
4.5L block $250 complete with pistons, rods, crank, water pump, oil pump etc. Assembled. Good shape with no nicks or scratches in cylinder walls. SOLD
2 Door Skins. $100 for pair. Need carpet on bottoms. Very, Very straight on top edge where most warp. I painted the top section with vinyl paint to match my interior. SOLD
81 Non S Throttle Body - $25 SOLD
85 Throttle Body - $35
NEW ADDITIONS!
5 Speed FLYWHEEL. $100
'81 stock Distro and new cap. $50 Needs new hard plug for green wires but both wires and connector pins are fins and plug in as is.
Oil Vent/Fill with 928MS Billet OIL Baffle $25
2 Water bridges with good sensors. One has brand new thermostat (3K miles). $25 each.
2 Complete front plastics/ timing belt cover. $35
I also have an extra flywheel lock MY '78-82 $25
and belt tensioning tool $25. SOLD
Shipping on all items will be by carrier of your choice and be ACTUAL shipping cost. I have plenty of boxes and packing material so no packing or handling charges. Local pick up okay.
PAYPAL, Check, Cash, First born child, coupons to the Bunny Ranch all accepted.
Cheers,
Mike
I'll get more pics up as soon as I can.
I think the sum of the parts may be worth more than the whole Engine so I'll list it both ways. Going on ebay tonight and the Rennlist for sale area. Engine is running VERY strong right now. I'm pulling the engine this weekend and expect to have it apart by next for shipping. ebay auctions will run through next Saturday. Prices here are below reserve so let me know before the auction ends if you want something. If any prices are out of line, please let me know, I tried to come in well under closed ebay auction prices but not everything could be researched easily.
Let me know if any of this peeks your interest:
Euro S heads - $400 for pair, in great shape. SOLD
Euro S cams (Stock Euro S cams not my regrinds) - $400 Come with boxes, lifters and '85 cam gears. SOLD
Euro S intake w/ CIS injectors - $150 Painted Yellow with red boots. Paint comes of easily. Also comes with stonger, larger collar boot for TB connection. ON HOLD
Euro S throttle Body (Needs work) - $25
Fly Cut '85 pistons for 16v : Tolerance group One, which seems to be the most common block type - $150
5-speed flywheel - SOLD - Going to DanglerB
8 Braided SS 3an fuel lines for CIS -$200 Carl's kit cost $1200!! SOLD
Complete CIS system just rebuilt with new o-rings - $250. Includes everything, fuel distributor, lower S plenum, damper, all hard lines. NO WUR!! SOLD
WUR Rebuilt and cleaned last 3 months $125 for 80-83 model, not sure if it will work for '78-79 model. Heat circuit on bimetallic strip is different. SOLD
MSD Billet 928 Distro w/Magnicore wires (Can't get from MSD..) $300 It's like buying the wires new and getting a free billet Distro. Distro has magnetic pickup for most accurate timing you can have on an early shark. Adjustable advance curves for fine tuning. SOLD
MSD 6AL ignition - $125 with rev limit and extra pills. Will throw in Accel HO coil as well. Hooks up to the distro with one wire. More power to the plugs. Great combo with the distro, magnicore and accel coil. SOLD
MSDS Headers - $200 Painted with Yellow Exhaust paint. Not jet coating. Not new but very functional, no leaks. SOLD
175a Alternator (Bosche casing) $150 Maybe 5K miles since built. After market kit, paid over $350 to have done. Will run serious electronics and stereo with decent idle output. SOLD
Stock Alternator - SOLD
2x starters $50 -One SOLD
78 cams $150 with boxes, lifters and stock cam gears. take 1mm off with a base circle grind and have a great cam for boost. Less overlap than the bigger S cams. SOLD
77-82 Brand New timing belt, never installed. - $25 SOLD
Piston set for 4.5L decent shape, clean no carbon build up. - $100 includes circlips and pin bushing. I'd replace the circlips as best practice but their there...
2 complete Rod sets for 4.5, 4.7 and 5.0L. Should work for all 86 and before. $75 each.
78 heads $100 for pair. Need nothing.
4.5L block $250 complete with pistons, rods, crank, water pump, oil pump etc. Assembled. Good shape with no nicks or scratches in cylinder walls. SOLD
2 Door Skins. $100 for pair. Need carpet on bottoms. Very, Very straight on top edge where most warp. I painted the top section with vinyl paint to match my interior. SOLD
81 Non S Throttle Body - $25 SOLD
85 Throttle Body - $35
NEW ADDITIONS!
5 Speed FLYWHEEL. $100
'81 stock Distro and new cap. $50 Needs new hard plug for green wires but both wires and connector pins are fins and plug in as is.
Oil Vent/Fill with 928MS Billet OIL Baffle $25
2 Water bridges with good sensors. One has brand new thermostat (3K miles). $25 each.
2 Complete front plastics/ timing belt cover. $35
I also have an extra flywheel lock MY '78-82 $25
and belt tensioning tool $25. SOLD
Shipping on all items will be by carrier of your choice and be ACTUAL shipping cost. I have plenty of boxes and packing material so no packing or handling charges. Local pick up okay.
PAYPAL, Check, Cash, First born child, coupons to the Bunny Ranch all accepted.
Cheers,
Mike
I'll get more pics up as soon as I can.
Last edited by RicerSchnitzzle; 10-26-2009 at 10:27 AM.
10-17-2009, 01:19 PM
#2
Three Wheelin'
Thread Starter
Join Date: Sep 2006
Location: Banished to the SBC Wastelands
Posts: 1,578
Likes: 0
Received 4 Likes
on
3 Posts
Couple more pics showing the MSD and accel coil. Coil picture above with headers is not the one. Also showing the fly cut pistons in engine and out.
Thanks for looking!
Thanks for looking!
10-17-2009, 02:07 PM
#6
Three Wheelin'
Thread Starter
Join Date: Sep 2006
Location: Banished to the SBC Wastelands
Posts: 1,578
Likes: 0
Received 4 Likes
on
3 Posts
Of course cashing in some of my stock options to get the stroker had a little guilt..
However my company has done very well this year and I wanted to unload some before the market catches up to us. BTW little tidbit.. My employer DollarTree had the best performing stock in the fortune 500 last year. While every one else tanked with the economic crisis we stayed strong. The way I see it, I worked hard and deserve a stroker track car. 
Here's a couple more pics of the flywheel lock and TB tool, Door Skins and 85+81 TBs.
Trending Topics
10-17-2009, 02:49 PM
#9
Three Wheelin'
Thread Starter
Join Date: Sep 2006
Location: Banished to the SBC Wastelands
Posts: 1,578
Likes: 0
Received 4 Likes
on
3 Posts
I didn't put one down for the whole thing. Feel free to shot an offer. However once one part is paid for I can no longer sell it as a whole.
10-17-2009, 03:20 PM
#11
Three Wheelin'
Thread Starter
Join Date: Sep 2006
Location: Banished to the SBC Wastelands
Posts: 1,578
Likes: 0
Received 4 Likes
on
3 Posts
I have some items paid for already so I can no longer sell the whole engine. Plus I think I like the idea of having another spare 5.0L block.
10-17-2009, 03:43 PM
#12
Instructor
Join Date: Oct 2009
Location: Bucharest, Romania
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
No problem. If you have some of the other parts I need, let me know.
P.S. Do you have the instructions for the cam belt tensioning tool? If yes, and if the belt is with square teeth, I'll take the tool and the belt.
P.S. Do you have the instructions for the cam belt tensioning tool? If yes, and if the belt is with square teeth, I'll take the tool and the belt.
10-17-2009, 04:00 PM
#13
Three Wheelin'
Thread Starter
Join Date: Sep 2006
Location: Banished to the SBC Wastelands
Posts: 1,578
Likes: 0
Received 4 Likes
on
3 Posts
Yes I have the timing belt tool instructions and the belt is square tooth. PM me your address for shipping rates, or figure yourself using my zip code of 36526 and figuring a small box at 5 pounds tops.
10-17-2009, 08:20 PM
#14
Three Wheelin'
Thread Starter
Join Date: Sep 2006
Location: Banished to the SBC Wastelands
Posts: 1,578
Likes: 0
Received 4 Likes
on
3 Posts
FYI. Ebay auctions start tomorrow around 4PM EST and go 7 days. I will cancel any auction for a Rennlister that pays the above prices or haggles me to the point of submission.