Shane

Installed a new odo gear in Zelda yesterday! Thanks for the write-up Dwayne!

U-928

Another successful completion of the rennbay upgrade gear and reset of odo.

IrishLegend

Nice...something else to add to the list. Might as well go LED too!

BigAl1

Just in the middle of replacing my ODO gear, and finding the gear is snug on the shaft, enough that it has some resistance to spin. The old gummy stuff is all cleaned off the shaft, so that is not the problem. Is this gear supposed to spin freely or have a little resistance?
BTW - THANKS to Dwayne for this write-up. So nice to just flip through the pages as you go!

cookr14

Dwayne, thank you so much! I'm just looking forward to getting this back together...I wanted to clean the connections but Does anyone know why (a) previous owner would have soldered these two contacts? Something to do with the speedo - which only works sometimes.. and when it does its 5 mph off...

Now I cant clean because of [whatever this is] because i cant get the plastic off. What would you do?

i have attached photos..

cookr14

geez sorry for the huge photos!

white93nsx

Amazing write-up and step by step instructions. I took mine apart to verify it was the gear and sure enough, the gear teeth had many missing teeth. I have mine apart and just ordered the new gear. Can't wait to get it back together and back on the road again. Thank so much Dwayne.

JayPoorJay

This dude Dwayne is my herO!!!

Sweet, simple, to the point and NO complaining or exaggerating on how difficult a job is!

Hats oft to ya Brother!

disintegrated!

Jerry Feather

OOPS, this is the btter thread to bump for the ODO repair.

rdwalker

Wow, some 15 years after the original post and it still rocks.
What a great write-up! Thanks and cheers!