What is going to be your next Major tool Purchase?
#1
Rest in Peace
Rennlist Member
Rennlist Member
Thread Starter
Join Date: May 2006
Location: Bird lover in Sharpsburg
Posts: 9,903
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I do not have a Plasma Cutter and I want one.
I also want a lath, bandsaw and a mill, but that aint going to happen anytime soon.
I have Snappy paid off enough to get one, any suggestions?
All ears here.
I also want a lath, bandsaw and a mill, but that aint going to happen anytime soon.
I have Snappy paid off enough to get one, any suggestions?
All ears here.
#2
Rennlist Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have a CNC plasma cutter at the top of my list.
When you get a Plasma Cutter get a big one, don't waste your time with the smaller ones. Once you get one you will wonder how you ever did without one, VERY handy!.
When you get a Plasma Cutter get a big one, don't waste your time with the smaller ones. Once you get one you will wonder how you ever did without one, VERY handy!.
__________________
David Roberts
2010 Jaguar XKR Coupe - 510HP Stock - Liquid Silver Metallic
928 Owners Club Co-Founder
Rennlist 928 Forum Main Sponsor
www.928gt.com
928 Specialists on Facebook - 928Specialists
Sharks in the Mountains on Facebook - 928SITM
David Roberts
2010 Jaguar XKR Coupe - 510HP Stock - Liquid Silver Metallic
928 Owners Club Co-Founder
Rennlist 928 Forum Main Sponsor
www.928gt.com
928 Specialists on Facebook - 928Specialists
Sharks in the Mountains on Facebook - 928SITM
![](http://www.928gt.com/images/928Specialists-COVER3-928GTcom.png)
#3
Three Wheelin'
Join Date: Mar 2006
Location: San Diego / Las Vegas
Posts: 1,813
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I used to do work with 2 different shops. 1 guy had a plasma the other didn't. The guy with the plasma seemed to incorporate into every job, wheeled it around with him everwhere around the shop, the guy that didn't have one would stand there and figure out how a sawzal and cuttoff tool/grinder was gonna do the job...
#4
Rest in Peace
Rennlist Member
Rennlist Member
Thread Starter
Join Date: May 2006
Location: Bird lover in Sharpsburg
Posts: 9,903
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I know better than to get a "Home Owners" type, besides that, Snappy makes a percentage off of what he sells, he would much rather sell me one that is 3 grand than one that is 12 hundred.
Buying cheap tools is never a good investment in my book.
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
#5
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Makita orbital buffer
#6
Vegas, Baby!
Rennlist Member
Rennlist Member
![](https://rennlist.com/forums/images/ranks/veteran_navy.png)
![](https://rennlist.com/forums/images/ranks/veteran_marine_corp.png)
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
A real good one is about $ 2600.oo and change. You also need a comercial air compressor. Now if you want to be big time fabricators, spring for a lazer cutter, or water jet. Its easy for me to run my mouth cause I work for one of Uncle Sugar's biggest Contractors. And do all my home stuff at work. Dave Roberts is right on, CNC is where its at. For what you guys are doing at home ESAB makes a great unit, and I think it out performs Miller, or Lincoln. It cost less. If you want to reproduce aluminum, or stainless panels, or make 2 to 25 of the same copies, invest in a tru-tracer of pentagraph. Also you'll need 230 volt power. 50 amp circut to run one.
#7
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2003
Location: Gone. On the Open Road
Posts: 16,538
Received 1,677 Likes
on
1,087 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'd like to get this:
http://www.acsource.com/index.asp?Pa...ROD&ProdID=156
But, I may have to settle for this:
http://cgi.ebay.com/Mastercool-A-C-A...#ht_2060wt_887
http://www.acsource.com/index.asp?Pa...ROD&ProdID=156
But, I may have to settle for this:
http://cgi.ebay.com/Mastercool-A-C-A...#ht_2060wt_887
Last edited by worf928; 08-10-2009 at 08:47 AM.
Trending Topics
#8
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have a nice plasma cutter will sever 5/8", I also have a massive TIG, MIG, drill press, and alot of other tools.
The 3 tools I really want is an proper alignment tool, a milling machine, and a 10" diameter lathe.
The 3 tools I really want is an proper alignment tool, a milling machine, and a 10" diameter lathe.
#9
Archive Gatekeeper
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
This just arrived:
![](https://webfiles.uci.edu/redwards/public/Strut%20spring%20compressor%208-8-09.jpg)
I'd love to find an R12/r134a recycling machine that has a relatively small footprint- running out of space in my half of the garage....
![](https://webfiles.uci.edu/redwards/public/Strut%20spring%20compressor%208-8-09.jpg)
I'd love to find an R12/r134a recycling machine that has a relatively small footprint- running out of space in my half of the garage....
#10
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Colin, I've been looking at the lathe's as of late. No really good deals so far.
Also keeping my eye out for good tire mounting/road force balancing units. There are a few out there but the guys here want damn near what they paid for them. Not that I blame them.
What I really want is a couple of A/C recovery/cleaner units, I missed a deal on two units, one R-12 and one R134a for $400.00 the other day. I am kicking myself. The stuff I have is ok, but I can always use more and newer.
Also keeping my eye out for good tire mounting/road force balancing units. There are a few out there but the guys here want damn near what they paid for them. Not that I blame them.
What I really want is a couple of A/C recovery/cleaner units, I missed a deal on two units, one R-12 and one R134a for $400.00 the other day. I am kicking myself. The stuff I have is ok, but I can always use more and newer.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
#11
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have all the tools to do A/C, well all but the recycler. For that I just have the guys go to a shop and have the old stuff captured.
Rob, where did you get that spring compressor? I want one. I have been considering making a better one for myself, but time is a problem.
Rob, where did you get that spring compressor? I want one. I have been considering making a better one for myself, but time is a problem.
#12
Archive Gatekeeper
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Colin- $169, free shipping. Arrived in 1 day, since they're in SoCal. Cheap Chinese steel, but the machining work is reasonably solid.
http://cgi.ebay.com/ebaymotors/ws/eB...ht_3370wt_1165
http://cgi.ebay.com/ebaymotors/ws/eB...ht_3370wt_1165
#13
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Wow, spring compressor looks just like the ones in a shop.
Before the 928 my tools lived in a drawer in a kitchen plus one old metal giant lunchbox thing. Now I have a rollaway with an intermediate box and two service carts fairly loaded with tools. I've got a few things left that I would "like" to have, SLF80 would be nice, but nothing left I "need" thanks to this place.
http://www.garagejournal.com/forum/forumdisplay.php?f=4
SnapOn industrial makes a 15mm swivel extension socket I wouldn't mind adding to this 10mm to 13mm set.
Before the 928 my tools lived in a drawer in a kitchen plus one old metal giant lunchbox thing. Now I have a rollaway with an intermediate box and two service carts fairly loaded with tools. I've got a few things left that I would "like" to have, SLF80 would be nice, but nothing left I "need" thanks to this place.
http://www.garagejournal.com/forum/forumdisplay.php?f=4
SnapOn industrial makes a 15mm swivel extension socket I wouldn't mind adding to this 10mm to 13mm set.
#14
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2003
Location: Gone. On the Open Road
Posts: 16,538
Received 1,677 Likes
on
1,087 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
... but nothing left I "need" thanks to this place.
http://www.garagejournal.com/forum/forumdisplay.php?f=4
http://www.garagejournal.com/forum/forumdisplay.php?f=4
Bastard.
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
#15
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
This is aclose out item at HF I bought I got a set at one of the local stores for $97 this weekend
![rockon](https://rennlist.com/forums/graemlins/rockon.gif)
Last edited by Herman K; 05-29-2010 at 06:31 PM.