Andy Kay

I would like a set for my 87 S4, is anyone in the DFW 928 group printing these?

Ducman82

wish i was skilled enough to make this for my 81

Alan

You certainly are....!

Alan

Alan

Michael - would you be willing to share the original MS Word or MS Powerpoint source materials for this as a base for others to modify - folk's don't seem to know how to get started - a full set for all years would be really nice to complete (with a little community help)...

Alan

Bilal928S4

Does anybody have the original CE panel fuse/relay chart copied/digitized. I need to make changes to mine and put it on the cover.
Thanks

Ducman82

with a template and the right program, i should be able too... if i can get in in word format... BAM... LOL

MBMB

Tyvek labels?

skpyle

Just found this. Thanks to all parties involved in making the various charts!
I have completely stolen this for printing for the Red Witch.

Thanks!

Seth K. Pyle

RFJ

thanks for this

skpyle

Got mine done tonight. Thanks again!


Seth K. Pyle

buccicone

Was wondering where my S4 got these stickers. Will make some up for '86.5 Blackie.

Alan

Seth - if you have a fuse tester relay it is supposed to be in position 16 and the label is half height so the fuse part is still accessible. Maybe you don't have a fuse tester relay - but the car should have been delivered with one.

The fuse tester relay is functionally the same as any 141 951 253B so could/can be installed in any of those positions as an alternative.

Alan

skpyle

Hi Alan!

The Red Witch did have a fuse tester relay in position 16. Believing the relay to be original, I elected to replace it with a new 53B relay.
I keep one of my Fluke 87V's in the Red Witch, so fuse testing is covered.

I am lazy and didn't bother cutting the excess of label 16.


Thanks!

Seth K. Pyle

martinss

Thanks for resurrecting this thread. I saved the files some time ago and only used them recently - at which point I forgot where I got them from. I had to fiddle with the scaling to get the size I wanted, but I'm very pleased with the results. Thanks to the OP. Here's the CE on my '90:

buccicone

Did this today to 86.5 "Blackie". Printed on laser printer. Font was perfect. Laminated with packing tape, cleaned each relay in place, cut each sticker out, and used glue stick to fasten.