Swapping S4 bumpers onto an OB (another track car project question)
05-12-2009, 01:31 PM
#17
Rennlist Member
05-12-2009, 08:38 PM
#19
Rennlist Member
Here you go.........
The tailite recesses have to be sunk in further & the upper edges of the green primered areas also must be removed (there is a protruding corner along this upper edge) & moved in towards the front of the car. I chose to cut out the taillite pockets & fab up filler metal panels & weld them back in.
Hammer
The tailite recesses have to be sunk in further & the upper edges of the green primered areas also must be removed (there is a protruding corner along this upper edge) & moved in towards the front of the car. I chose to cut out the taillite pockets & fab up filler metal panels & weld them back in.
Hammer
10-17-2011, 07:35 PM
#20
Drifting
I acquired some of the AIR S4 conversion bumpers, in fiberglass, a while back. If anyone is interested, I would sell them for a very good deal. Shoot me an email or PM if interested. They need a little work around the edges, as the were bondo'ed into the body of the other car and cut out... so there is bondo all around the seams.
10-17-2011, 08:57 PM
#21
Advanced
Join Date: Sep 2002
Location: Texas
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
I acquired some of the AIR S4 conversion bumpers, in fiberglass, a while back. If anyone is interested, I would sell them for a very good deal. Shoot me an email or PM if interested. They need a little work around the edges, as the were bondo'ed into the body of the other car and cut out... so there is bondo all around the seams.
