Question about wheel offset vs. wheel width
#16
What year/type of 928 r they going on?
some links for 19" rims
http://www.championmotorsport.com/996RG5B.htm
http://www.wheeldynamics.net/appguide.html
I think my rears are 19x11.5 w/a 62 offset and fronts are 8.5/19 w/a 53 offset... they were for a 997?
some links for 19" rims
http://www.championmotorsport.com/996RG5B.htm
http://www.wheeldynamics.net/appguide.html
I think my rears are 19x11.5 w/a 62 offset and fronts are 8.5/19 w/a 53 offset... they were for a 997?
While I like some of the wheels on the Wheel Dynamics page I'm looking for something a little different.
#17
#18
The best wheel calculator I have found.
http://www.bigcustomwheels.com/info_specs.jsp
http://www.bigcustomwheels.com/info_specs.jsp
#19
I talked to Kim Crumb before I bought my wheels for the S4. The rear of the GTS is different with the factory long studs, 35mm spacer and fender flares. I wouldn't know what the rear size and offset should be, and it is not as easy as just taking 35mm away from the offset to make up for the GTS difference.
The people here with GTSs that have bought custom wheels would know what fits.
The people here with GTSs that have bought custom wheels would know what fits.
#20
I talked to Kim Crumb before I bought my wheels for the S4. The rear of the GTS is different with the factory long studs, 35mm spacer and fender flares. I wouldn't know what the rear size and offset should be, and it is not as easy as just taking 35mm away from the offset to make up for the GTS difference.
The people here with GTSs that have bought custom wheels would know what fits.
The people here with GTSs that have bought custom wheels would know what fits.
#21
Chuck, You may want to check Complete Custom Wheel in Daytona. www.ccwheel.com They have been making 1 piece forged wheels for a couple years and offer 19". They can machine any offset you want. I visited them last year during RennSport and picked up a set of front wheels for my track car. Reasonably priced, because they don't advertise and they don't sell through distributors.
#22
Chuck, You may want to check Complete Custom Wheel in Daytona. www.ccwheel.com They have been making 1 piece forged wheels for a couple years and offer 19". They can machine any offset you want. I visited them last year during RennSport and picked up a set of front wheels for my track car. Reasonably priced, because they don't advertise and they don't sell through distributors.