anyone have a flat black 928?
#16
Race Car
Dash connectors need polarity or position locations
82
The 2-black guides were removed from the dash and I need to know the position of each female connector. The plastic tabs have a guided insert so to not reverse polarity but can mount either way on the dash assembly.
Also does anyone know the reference in the manual as to there numbering and location on the dash. I have repaired a few dash connections and ready to reinstall unit.
Electrical diagram to connector reference on page 97-139 page 97:
M shows 13 connections on schematic
R shows 13 connections on schematic
L shows 12 connections on schematic
Dash has the following:
Drivers side has 12 connections
Passenger side has 12 connections
Back connector side has 14 connections
Did I explain this enough ?
The 2-black guides were removed from the dash and I need to know the position of each female connector. The plastic tabs have a guided insert so to not reverse polarity but can mount either way on the dash assembly.
Also does anyone know the reference in the manual as to there numbering and location on the dash. I have repaired a few dash connections and ready to reinstall unit.
Electrical diagram to connector reference on page 97-139 page 97:
M shows 13 connections on schematic
R shows 13 connections on schematic
L shows 12 connections on schematic
Dash has the following:
Drivers side has 12 connections
Passenger side has 12 connections
Back connector side has 14 connections
Did I explain this enough ?
#17
Man of many SIGs
Rennlist Member
Rennlist Member
Mark, not only did you post that in the wrong thread, you double posted it in the wrong thread.
Here's a nice example of a satin black paint on a bad @$$ car.
Here's a nice example of a satin black paint on a bad @$$ car.
#18
Three Wheelin'
Join Date: Sep 2006
Location: Banished to the SBC Wastelands
Posts: 1,578
Likes: 0
Received 4 Likes
on
3 Posts
IMO The first shark is too ashey, almost grey. I will try to get better pics of mine, but for now a camera phone pic will have to do. And yes, I like a little rice with my schnitzle..
Hot Rod Flats Satin Black.
Hood is CF so it looks a little off black in the photos.
Not a great photo but shows the satin clear will still bead up water..
Hot Rod Flats Satin Black.
Hood is CF so it looks a little off black in the photos.
Not a great photo but shows the satin clear will still bead up water..
#19
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
few weeks ago I had Tim Allen's 68 Roadrunner original Hemi 4 speed car in my drive way for several days....he had it done in satin black it looked kinda neat BUT if you touched it or something just lightly scratched it it showed ! and you can not just polish/buff it out ! By the time it left I had decided it just looked like PRIMER and you could rattle can one for $100. With an original paint job the car would have probably be worth at lot more than it was. I should have driven that car around the block ...funny I never even thought about that
#22
Inventor
Rennlist Member
Rennlist Member
#24
Addict
Rennlist Member
Rennlist Member
Satin, not Flat. I thought about this for the Black 85's wheels, but said F it.
It would look nice...if you did it right.
Just remember, SATIN, not FLAT.
It would look nice...if you did it right.
Just remember, SATIN, not FLAT.
#26
Rennlist Member
few weeks ago I had Tim Allen's 68 Roadrunner original Hemi 4 speed car in my drive way for several days....he had it done in satin black it looked kinda neat BUT if you touched it or something just lightly scratched it it showed ! and you can not just polish/buff it out ! By the time it left I had decided it just looked like PRIMER and you could rattle can one for $100. With an original paint job the car would have probably be worth at lot more than it was. I should have driven that car around the block ...funny I never even thought about that
#30
Three Wheelin'
Join Date: Sep 2006
Location: Banished to the SBC Wastelands
Posts: 1,578
Likes: 0
Received 4 Likes
on
3 Posts
Glad that thread got closed before I checked back in.... Mine are CF and serve no useful purpose other than to get under age chicks to think I'm cool.
Personally I think Carl got unfairly raped. For a guy who comes up with lots of great add ons for our cars when few others are supporting us with new products, he got blasted. Lots of closed minded folks... A simple "Not for me" would have worked.
My Shark gets lots of compliments at local shows, however it would be regulated to the auxillary parking lot at a PCA event. I know my and my car's lot in life. I like to tinker and experiment on Ricerschnitzzle, it keeps me home in the garage and out of the bars...
Satin Black.. Love it. Especially not having to wax the car anymore..
Another angle
Personally I think Carl got unfairly raped. For a guy who comes up with lots of great add ons for our cars when few others are supporting us with new products, he got blasted. Lots of closed minded folks... A simple "Not for me" would have worked.
My Shark gets lots of compliments at local shows, however it would be regulated to the auxillary parking lot at a PCA event. I know my and my car's lot in life. I like to tinker and experiment on Ricerschnitzzle, it keeps me home in the garage and out of the bars...
Satin Black.. Love it. Especially not having to wax the car anymore..
Another angle
Last edited by RicerSchnitzzle; 11-10-2008 at 07:53 PM.