Stereo Harness
#1
Pro
Thread Starter
Stereo Harness
This morning I grounded out the small factory red wire from the radio harness. This is the one that provides constant 12v or pin 5 on the factory plug.
Plug has two large connectors and four smaller connectors
1st connector is ground
2nd is ACC 12V
3rd not used
4th PWR ANT
5th constant power
6th ARI/ Ground for Alarm
| |
| | | | | |
1 2 3 4 5 6
My question is there a fuse for the constant power? I know there is none for the 2nd pin as that ties indirectly to the ignition switch.
Plug has two large connectors and four smaller connectors
1st connector is ground
2nd is ACC 12V
3rd not used
4th PWR ANT
5th constant power
6th ARI/ Ground for Alarm
| |
| | | | | |
1 2 3 4 5 6
My question is there a fuse for the constant power? I know there is none for the 2nd pin as that ties indirectly to the ignition switch.