sjfarbs

Hey guys.

I am about to did into a heater valve and vacuum test and need to remove the air box. Since I have not taken it off yet, thought I would post before doing something stupid

I see the 2 bolts on either side, then the 4 in the middle of the intake hole. What needs to come off to remove the airbox? Are there any sensors attached on the underside I need to mindful of?

Thanks.

Shawn

84' 928
74' TR6

Dean_Fuller

My 82 has a sensor that has to be unsnaped...not sure about an 84. The PET manual would show.

Dean_Fuller

After looking at the PET it looks like the 84 model just unbolts and lifts off.

sjfarbs

Thanks Dean..............do all 6 bolts come out then? The 2 on either side and the 4 in the middle?

Randy V

Should be just 2 bolts (#9 in the diagram above) and a breather hose on the bottom left (passenger side) that should just pull off.

sjfarbs

Thanks Randy, yup just those 2 plus the breather, she it off.
Vacuum test commence.........