Bill Ball: Another Appreciation (Rear Main Seal)
12-22-2007, 05:20 PM
#1
Instructor
Thread Starter
Join Date: Dec 2005
Location: Silver Spring, MD
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Bill Ball: Another Appreciation (Rear Main Seal)
I recently finished a rear main seal install. Obviously, I used Bill's write-up available here on the Forum and on his Web page. Bill also was unstinting in patiently answering my questions and helping me over some rough spots.
I made quite a few mistakes. But those are what we learn from. So, if there's anyone in the DC-MD-northern-VA area who's contemplating this job, PM me. I'll gladly volunteer my time and some fabricated tools in hopes of making the job a little less tedious and stressful.
I made quite a few mistakes. But those are what we learn from. So, if there's anyone in the DC-MD-northern-VA area who's contemplating this job, PM me. I'll gladly volunteer my time and some fabricated tools in hopes of making the job a little less tedious and stressful.
12-22-2007, 09:47 PM
#5
Team Owner
Yeah Thats a great Idea.............
12-22-2007, 10:13 PM
#7
Rest in Peace
Rennlist Member
Rennlist Member
You are a legend Bill, now and forever.
In fifty years, the stories of Bill Ball lifting a motor out one handed.
Then there will be the stories of a maverick fabricator known as Por'Ken casting magic hardware to improve the engine you removed one handed!
In fifty years, the stories of Bill Ball lifting a motor out one handed.
Then there will be the stories of a maverick fabricator known as Por'Ken casting magic hardware to improve the engine you removed one handed!