POST A PIC OF YOUR BABY HERE!!!!
#61
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Steve, you might want to consider adjusting the retracted position of your headlights to eliminate that gap between the fender cutout and the headlight. Made a big improvement in the appearance on mine - and it's real easy to do. Just a suggestion.
#63
Official Bay Area Patriot
Fuse 24 Assassin
Rennlist Member
Fuse 24 Assassin
Rennlist Member
Thread Starter
man those are some awesome cars Nicole, beauutiful babies...all of them Steve man that by far is the BEST graphics I've seen on a Porsche!!!! Beautiful cars everyone! Its good to be a shark once again after 4 years!
#65
Hi Sharks,
Here is the heart of my road rocket. I went with the original equipment hood liner. I like to keep things as original as economically practical. I have only used non OEM hoses, clamps, and air conditioning compressor.:
Here is the heart of my road rocket. I went with the original equipment hood liner. I like to keep things as original as economically practical. I have only used non OEM hoses, clamps, and air conditioning compressor.:
#66
Intermediate
Join Date: Mar 2002
Location: Southern New Hampshire/Mass brdr
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
My *EVIL* little black shark...
For more, see <a href="http://home.attbi.com/~r73059" target="_blank">http://home.attbi.com/~r73059</a>
'She's sixteen, she's beautiful, and she's mine"
well, almost 16! <img src="graemlins/wave.gif" border="0" alt="[byebye]" />
For more, see <a href="http://home.attbi.com/~r73059" target="_blank">http://home.attbi.com/~r73059</a>
'She's sixteen, she's beautiful, and she's mine"
well, almost 16! <img src="graemlins/wave.gif" border="0" alt="[byebye]" />
#67
Randy V
I'm dropping my 8" headlights in later this week. I'm looking at Steve's lights. Should they be raised?
I think you wrote in an earlier post that they (the headlights) should just touch a straight edge ruler. Which way (and where) should the ruler sit over the opening?
Do you have a picture of your's (headlights that is)?
Patrick
I'm dropping my 8" headlights in later this week. I'm looking at Steve's lights. Should they be raised?
I think you wrote in an earlier post that they (the headlights) should just touch a straight edge ruler. Which way (and where) should the ruler sit over the opening?
Do you have a picture of your's (headlights that is)?
Patrick
#70
Randy V, I was looking for that thread today and could not find it. It must have been under my nose.
Fortunatley, I printed that thread a week or two ago (and then forgot about it). Anyway, it answers all my questions. Thanks again.
Fortunatley, I printed that thread a week or two ago (and then forgot about it). Anyway, it answers all my questions. Thanks again.
#71
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
You guys have AWESOME sharks!!!
I'm sooo jealous!!! <img src="graemlins/c.gif" border="0" alt="[ouch]" />
I know I know...sell the M3 get a shark!
If only I could convince the Mrs!!!
Enjoy them! Hopefully one day I will be part of your family!
<img src="graemlins/beerchug.gif" border="0" alt="[cheers]" />
I'm sooo jealous!!! <img src="graemlins/c.gif" border="0" alt="[ouch]" />
I know I know...sell the M3 get a shark!
If only I could convince the Mrs!!!
Enjoy them! Hopefully one day I will be part of your family!
<img src="graemlins/beerchug.gif" border="0" alt="[cheers]" />
#72
Advanced
Join Date: Mar 2002
Location: United States - Iowa
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Adding to the group, here is my 79 shark with its claim to fame in the Midwest. Not a bad haul for participating in nothing but "Hot Rod" car shows. Didn't get any notices of any PCA events, but this year is different...
<a href="http://www.fortunecity.com/silverstone/boot/66/index.htm" target="_blank">Porsche 928 Driver Homepage</a>
<a href="http://www.fortunecity.com/silverstone/boot/66/index.htm" target="_blank">Porsche 928 Driver Homepage</a>