what is the whirring?
10-29-2007, 10:57 PM
#16
Drifting
Thread Starter
Join Date: Feb 2005
Location: Seattle, where everyone is above average, and the women are all beautiful
Posts: 2,932
Likes: 0
Received 1 Like
on
1 Post
i got them from a fellow rennlister, Jon Moeller, who had a post about having some remaining. I think he only has one left now, though. I think you can also get them from the Jager http://tinyurl.com/3apbrt
Re-using the old bushings was the downfall of my first torque tube rebuild, the process of getting them out of the old bearings and putting them in the new ones made them unhappy. I had to clearance the inside, and this allowed the driveshaft to move laterally a bit, which caused the bearings and holders to migrate together. I would strongly recommend new bushings.
Re-using the old bushings was the downfall of my first torque tube rebuild, the process of getting them out of the old bearings and putting them in the new ones made them unhappy. I had to clearance the inside, and this allowed the driveshaft to move laterally a bit, which caused the bearings and holders to migrate together. I would strongly recommend new bushings.
