15 minute instrument pod removal update and instrument light bulbs for an OK price
#106
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Agreed! There is no single light bulb inside my GTS left. It makes a huge difference.
It is finally like the factory should have delivered it (IMHO)![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Sorry the pictures are a little out of focus and overexposed. In reality they are just cool!!
It is finally like the factory should have delivered it (IMHO)
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Sorry the pictures are a little out of focus and overexposed. In reality they are just cool!!
#107
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi Shocki - Was there a thread on your window/sunroof switches? I remember Paul Champagne switches a couple years ago but I never seen ones like yours. They look stock--and awesome! Did a search but no results. Thanks!
#108
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The switch bases remain and the top part of the switch is replaced. That is the tricky part because the switches are not designed to be taken apart.
Roger sold them too, with little success only. To difficult for the average 928 owner.....
Last set was sold this week in Germany....
#109
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
If you're not sure, look for Dwayne's write-up on removing the pod - its more similar and shows the bolt locations more clearly from memory. RHD is pretty much the same, and with no airbag until '93 in the UK, its largely the same as Dwayne's write-up for all UK 87-92.
Its not hard - its just a fear thing (like most first-time jobs on a 928)
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Undo the steering wheel (27mm socket) and put it on the passenger seat. Then grab your philips screwdriver (for the plastic panels), 10mm socket (for the steering switchgear clamp) and 5mm allen key (to undo the pod bolts), and have at it. Be very gentle with the small plastic clips on the rear of the cluster - a bit of wd40 or silicone spray will help if they're stuck fast, and some gentle wiggling back and forth.
#110
Racer
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Great write up! One word of caution when taking the allen bolts out of the two front brackets. The rear allen bolt is a long bolt (i.e. about 3 inches long) and they thread through an aluminim frame into a nut that just rests on top of the frame. When you thread these back for the reassembly, make sure you gently thread them because in my case I pished too hard and knocked the nut into the area under the dash. This was a PITA to retrieve.
...Now I have to figure out why I have extra parts![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
- matt
...Now I have to figure out why I have extra parts
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
- matt
#111
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Great write up! One word of caution when taking the allen bolts out of the two front brackets. The rear allen bolt is a long bolt (i.e. about 3 inches long) and they thread through an aluminim frame into a nut that just rests on top of the frame. When you thread these back for the reassembly, make sure you gently thread them because in my case I pished too hard and knocked the nut into the area under the dash. This was a PITA to retrieve.
...Now I have to figure out why I have extra parts![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
- matt
...Now I have to figure out why I have extra parts
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
- matt
#112
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi all,
I have an '85 and my dash pod has a couple of cracks, plus the "D" indicator is out on my dash. Will these instructions work for me in removing the pod completely so that I can swap in a new one that I bought? Also, are the bulbs plug and play on the 1985, or are they soldered in? Thanks!
I have an '85 and my dash pod has a couple of cracks, plus the "D" indicator is out on my dash. Will these instructions work for me in removing the pod completely so that I can swap in a new one that I bought? Also, are the bulbs plug and play on the 1985, or are they soldered in? Thanks!
#118
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
True! I really miss my DFW 928 gang and wrenching sessions at the Tyson ranch I left in 2006....13 years ago can't believe it myself. But my GTS is still my companion. I just replaced the HVAC box entirely, due to an evaporator leak. Got a good used 94 unit from Roger. I guess my 92 is the only one in the world with a pollen filter 😎 now
#119
Instructor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi
I read a point in this thread I’d like to clarify. Re bulbs backlighting the digital dash. Screen. My digital dash screen is ‘faded or dim’ towards the left side. I thought the screen itself was dying, but is it actually a blown bulb?
Richard
I read a point in this thread I’d like to clarify. Re bulbs backlighting the digital dash. Screen. My digital dash screen is ‘faded or dim’ towards the left side. I thought the screen itself was dying, but is it actually a blown bulb?
Richard
#120
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
To check, just trigger the red bulbs by intentionally displaying a warning message The four red bulbs don't see a lot of use. Pull the connector of the coolant level sensor on the expansion tank and jump it. This will trigger the "low coolant warning message on the display. If this is shown correctly now in red, one of the yellow bulbs is blown.