Does anyone have a vacuum schematic for the 85-86 model years?

Also; for the same model years, there is a vacuum hose connecting to the intake manifold that is visible in between/underneath the front manifold tubes. It looks like it may be removable via a long spark plug cable remover type device. Is attempting to remove it risking an unplanned intake manifold removal job?

Thanks;

Mike

 

Have you performed a search?

 

Ignore the green circle...

 

Thanks Dave...This looks like a diagram from the FWSM. I didn't find a diagram, but obviously missed it. Can you reference the page enumber?

Mike

 

24-216 is where iit is for 87 and later, so it's probably just ahead of that, if you don't see a more specific response.

 

Could also be in yearly changes documents in Jim's CD's.

 

It's not from the regular manuals...it's from this...

 

Thanks again, Dave. I'm wanting to replace as much old vacuum hose as possible, without getting into an involuntary intake tear-down.

Mike

 

Be careful when working with the vacuum line to the transmission. Mine had a rubber connector at the front of the torque tube joining the hose from the 7-way connector to the longer hose from the transmission. It's in a difficult spot to access, so when I accidently pulled the engine bay hose out of that connector, I was spewing profanity for about an hour to get it back together.