engine trouble s4..
04-18-2007 | 03:46 PM
#31
Thread Starter
Advanced
Joined: Mar 2007
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
From: Norway
Originally Posted by PorKen
1800 ohm is about 20°C/68°F. The LH Temp II sensor has two separate sensors, one for the LH, and one for the EZ-K/F, each measured to ground. (The L-Jet sensor is one sensor, measured between the pins.)
What color is the sensor plastic? I don't know if this is true all the time, but my L-Jet sensor is white, whereas my LH-Jet is black.
What color is the sensor plastic? I don't know if this is true all the time, but my L-Jet sensor is white, whereas my LH-Jet is black.
My car is an 88model with the 32 valve,5 liter engine with the LH.
The contact on the sensor is blue and it measured about 550 ohm between the pins and about 1800 ohm from each to ground.
I order'd a new sensor today so i'll just have to wait and see..
Ron.
