Gearing vs Horsepower
#1
Banned
Thread Starter
Join Date: Feb 2007
Location: Orange, CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Gearing vs Horsepower
I have to say, I've come to really respect Mark Kebord during my 4 months on this list. I've read every word he's ever written at least 5 or 6 times, and everytime I do, I get MORE out of it.
So, this brings me to the question: How much gearing is required to get to say, 400hp? I've been looking for a 2.20 to swap into my trans, I figure conservatively that'sll give me between 400 - 500hp. What do you guys think? Are there aftermarket gear manufacturers for the 928?
So, this brings me to the question: How much gearing is required to get to say, 400hp? I've been looking for a 2.20 to swap into my trans, I figure conservatively that'sll give me between 400 - 500hp. What do you guys think? Are there aftermarket gear manufacturers for the 928?
#2
Addict
Rennlist Member
Rennlist Member
Go to a specialty lumber yard. Find some KOA wood. It's a very hard wood and you can carve your own gears.
The wood teeth should be strong enough to get the job done.
The wood teeth should be strong enough to get the job done.
#4
Three Wheelin'
Join Date: Dec 2003
Location: Vancouver, Canada
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Danglerb.
I have to say, I've come to really respect Mark Kebord during my 4 months on this list. I've read every word he's ever written at least 5 or 6 times, and everytime I do, I get MORE out of it.
So, this brings me to the question: How much gearing is required to get to say, 400hp? I've been looking for a 2.20 to swap into my trans, I figure conservatively that'sll give me between 400 - 500hp. What do you guys think? Are there aftermarket gear manufacturers for the 928?
So, this brings me to the question: How much gearing is required to get to say, 400hp? I've been looking for a 2.20 to swap into my trans, I figure conservatively that'sll give me between 400 - 500hp. What do you guys think? Are there aftermarket gear manufacturers for the 928?
Glenn
#6
Range Master
Pepsie Lite
Lifetime Rennlist
Member
Pepsie Lite
Lifetime Rennlist
Member
Jayzus!!!!!!!!!
THAT
WAS
FRIGGIN
FUNNY!!!!!!!!!!!!!!!!!!!!
THAT
WAS
FRIGGIN
FUNNY!!!!!!!!!!!!!!!!!!!!
Trending Topics
#10
Three Wheelin'
Join Date: Jun 2005
Location: Bournemouth, Dorset, UK.
Posts: 1,741
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Danglerb.
I have to say, I've come to really respect Mark Kebord during my 4 months on this list. I've read every word he's ever written at least 5 or 6 times, and everytime I do, I get MORE out of it.
So, this brings me to the question: How much gearing is required to get to say, 400hp? I've been looking for a 2.20 to swap into my trans, I figure conservatively that'sll give me between 400 - 500hp. What do you guys think? Are there aftermarket gear manufacturers for the 928?
So, this brings me to the question: How much gearing is required to get to say, 400hp? I've been looking for a 2.20 to swap into my trans, I figure conservatively that'sll give me between 400 - 500hp. What do you guys think? Are there aftermarket gear manufacturers for the 928?
Hi
Not sure if this is a joke but...
Gearing gives you speed or acceleration...not horsepower...
Well to be precise ..gearing allows the hp you have already got to be used in different ways....low gearing = fast accelleration......high gearing = slower acceleration but higher top speed...
So to answer your question.....gearing gives you precisely NO extra horsepower...
All the best Brett
PORSCHE 928 S2 AUTO V8 4.7 LTR 1986 IRIS METALLIC BLUE WITH X-PIPES ,RMB ,PROMAX CHIPS, KICKDOWN SWITCH, K&N, WIZARDS OF NOS - NITROUS KIT 150 HP JETTING - 505 BHP / 500 FT LBS TORQUE
PCGB UK 928 FORUM MODERATOR - Email managingdirector@pchealthcare.co.uk
#11
928 Collector
Rennlist Member
Rennlist Member
No. Porsche used only Lebanese Cedars, because their coating wears evenly. Keith if we use that domestic stuff, it'll work but we're gonna end up with more of a Ferrari kinda horsepower number.
#12
Rennlist Member
I don't know who this Danglerb. is, but the pool of potential topics is still pretty deep. He has yet to bring up wingnuts, contact patches, and - if he wants to go nuclear... venturis.
#13
Banned
Thread Starter
Join Date: Feb 2007
Location: Orange, CA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Hi Bret So happy you have such a healthy self-image ....
Originally Posted by BRETT AINLEY
......
All the best Brett
PORSCHE 928 S2 AUTO V8 4.7 LTR 1986 IRIS METALLIC BLUE WITH X-PIPES ,RMB ,PROMAX CHIPS, KICKDOWN SWITCH, K&N, WIZARDS OF NOS - NITROUS KIT 150 HP JETTING - 505 BHP / 500 FT LBS TORQUE
PCGB UK 928 FORUM MODERATOR - Email managingdirector@pchealthcare.co.uk
All the best Brett
PORSCHE 928 S2 AUTO V8 4.7 LTR 1986 IRIS METALLIC BLUE WITH X-PIPES ,RMB ,PROMAX CHIPS, KICKDOWN SWITCH, K&N, WIZARDS OF NOS - NITROUS KIT 150 HP JETTING - 505 BHP / 500 FT LBS TORQUE
PCGB UK 928 FORUM MODERATOR - Email managingdirector@pchealthcare.co.uk