I'm about to be Murferized - SC Kit Has Arrived
#1
On the Bandwagon
Rennlist Member
Rennlist Member
Thread Starter
I'm about to be Murferized - SC Kit Has Arrived
Thanks Carl and Tim, the craftsmanship looks amazing.
Can't wait till I install it - got to get my cam covers and intake on in the next couple of days and then get started.
Can't wait till I install it - got to get my cam covers and intake on in the next couple of days and then get started.
#2
Range Master
Pepsie Lite
Lifetime Rennlist
Member
Pepsie Lite
Lifetime Rennlist
Member
Hoo Rah.........another Supershark~~
#3
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
May the Murf be with you.
is that picture everything you received with the kit? I thought there were more parts.
is that picture everything you received with the kit? I thought there were more parts.
#6
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
You should be able to crank out the install this weekend - leave next Friday morning and be here in time for the Packer 928 Tailgate Party.
Trending Topics
#8
On the Bandwagon
Rennlist Member
Rennlist Member
Thread Starter
You should be able to crank out the install this weekend - leave next Friday morning and be here in time for the Packer 928 Tailgate Party
Cheers
#11
Range Master
Pepsie Lite
Lifetime Rennlist
Member
Pepsie Lite
Lifetime Rennlist
Member
Originally Posted by Jim R.
Hang on tight during that first WOT run!
Jim
#12
Captain Obvious
Super User
Super User
Originally Posted by Rob Roy
Man, I'd like to get back to my old stomping grounds. I remember the great Bears/Peckers games of the '80s. Unfortunately I have waay too much going on in September to be able to come.
Cheers
Cheers
Even if you could make it its not a good idea to bolt something like this up without any shake down testing. Put at least a few hundred miles on it before venturing out.
That's a nice blower!!!!
#13
Under the Lift
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by Andrew Olson
At least you didn't get screwed!
#14
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by Imo000
Even if you could make it its not a good idea to bolt something like this up without any shake down testing. Put at least a few hundred miles on it before venturing out.