Official random 928 Picture Thread (post a new 928 pic or stay out)
Archive Gatekeeper
Rennlist Member
Rennlist Member
^^^^^^^^^Blue cars are the best!
The following 8 users liked this post by Rob Edwards:
928 GT R (02-22-2023),
9two8 (02-23-2023),
Babado (03-02-2023),
Bertrand Daoust (02-23-2023),
Matt-R20 (02-24-2023),
and 3 others liked this post.
Rennlist Member
Join Date: Oct 2003
Location: Saco, Maine/ Scarborough, Maine
Posts: 1,963
Received 546 Likes
on
207 Posts
Rob, but I heard the red ones were faster!
The following 4 users liked this post by voskian:
The following 3 users liked this post by NoVector:
Archive Gatekeeper
Rennlist Member
Rennlist Member
15 minutes of sunshine today in sunny SoCal.
The following 6 users liked this post by Rob Edwards:
928 GT R (02-26-2023),
Bertrand Daoust (02-26-2023),
JWise (03-02-2023),
mark928s (02-26-2023),
Michael Benno (02-26-2023),
and 1 others liked this post.
Three Wheelin'
Join Date: May 2007
Location: Newcastle upon Tyne. England
Posts: 1,365
Received 71 Likes
on
40 Posts
Snap.! Sort of....., Ken 80 928S 5 Speed UK
The following 4 users liked this post by 9two8:
928 GT R (02-26-2023),
Bertrand Daoust (02-26-2023),
mark928s (02-26-2023),
Rob Edwards (02-26-2023)
Rennlist Member
The following 4 users liked this post by 928 GT R:
Rennlist Member
So, now I have all three X-Pipes, the Motorsport, the Great Britain solution and yet the Martellius from Finland. The later ones are plug and play without clamps.
599 €, 731 incl. VAT to Germany
599 €, 731 incl. VAT to Germany
Last edited by Darklands; 02-27-2023 at 07:41 AM.
The following users liked this post:
Dr. Gonzo (02-27-2023)
Race Car
The following users liked this post:
Darklands (02-27-2023)
Archive Gatekeeper
Rennlist Member
Rennlist Member
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Twin Turbo Todd Seven Liter. Todd and Mike more or less built these engines in tandem, each having their own theories on how to do it. Todd made the sleeves in his home shop.
Rennlist Member
Join Date: Feb 2011
Location: Mostly in my workshop located in Sweden.
Posts: 2,226
Received 442 Likes
on
244 Posts
Anyone with access to a lathe can make cylinder sleeves. It is a fairly simple operation. Careful, however, is the outer diameter for a correct fit in the engine block.
Boring and honing is performed when the sleeve is installed in the engine block.
Åke
Boring and honing is performed when the sleeve is installed in the engine block.
Åke
Rennlist Member
Join Date: Feb 2011
Location: Mostly in my workshop located in Sweden.
Posts: 2,226
Received 442 Likes
on
244 Posts
See https://rennlist.com/forums/928-foru...ject-pics.html
The car with the 7L high-performance engine is owned by a former Rennlister and is not in use.
Åke
The car with the 7L high-performance engine is owned by a former Rennlister and is not in use.
Åke
Last edited by Strosek Ultra; 03-01-2023 at 10:19 AM.
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
See https://rennlist.com/forums/928-foru...ject-pics.html
The car with the 7L high-performance engine is owned by a former Rennlister and is not in use.
Åke
The car with the 7L high-performance engine is owned by a former Rennlister and is not in use.
Åke
Another one of Todd's crazy ideas that we'll be duplicating on my 87, hopefully soon.