s928s

I am in the processof resconstructing the engine harness my '82 euro.I am looking for a diagraham for the 14 pin connector to main harness. I just want make sure the wires are in the correct place. Thanks in advance, DAVID

Airflite40

David, I have this info, but I just moved and I will get it to you. I did this job about two years ago and I have to find what box my diagrams and notes went into Sorry it's taking me so long. I promise it by this weekend.

sublimate

It's pricey, but just so you know it's out there:
http://www.928motorsports.com/parts/wiringharness.php

Scott M.

Check Greg Nichols site. I posted the wire layout there a few years ago.

Airflite40

Hey David, I found my diagrams and I will upload them tonight when I get home. Need to fire up my scanner. Look for them around 7pm CST. Borys.

MarkM

On a similar note, I'm dropping a 79 Euro engine in an 82 US chassis on Saturday. I'm assuming the wiring is the same. Any diagrams with thouse two models would be helpful.

Thanks!

s928s

Yes they are wired the same..check Greg Nichols site.

Airflite40

well I know its late, but hopefully this helps a little more than the nichols info. The scanner was a no go, so I just drew this in paint. Good luck!

Airflite40

oh yeah, the measurement is the diameter of the wire cross section. You can buy metric wires and the proper amp connectors from www.eagleday.com