Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

New Head Gaskets are on - Now leaking somewhere else. Initial post updated with pics.

Thread Tools
 
Search this Thread
 
Old 04-11-2006, 12:11 AM
  #1  
hacker-pschorr
Administrator - "Tyson"
Lifetime Rennlist
Member
Thread Starter
 
hacker-pschorr's Avatar
 
Join Date: Aug 2001
Location: Up Nort
Posts: 1,604
Received 2,225 Likes on 1,254 Posts
Default New Head Gaskets are on - Now leaking somewhere else. Initial post updated with pics.

Final chapter in my head gasket job:

Carl's oil drain fix-it plug is holding tight, dodged an oil pan replacement here.

Found my belt tensioner dripping - thanks to Jim Page, that leak is fixed (yes, it is really fixed, no drips here).

Running strong, sounds great (idles a bit rough, need to check timing).

After a drive around the highway block - crawl under the car and see coolant - dripping off the middle of the oil pan - it's running from the front of the motor, down to the oil pan. Must be the water pump, not sure. No I didn't replace the pump with the new timing belt (it's less than a year old, seamed like a waste). I dunno, took the belt covers off, let it run for about 20 minutes in the garage, not a drop anywhere. I'm puzzled.

On the good news - my 79 survived another DE weekend. I'll have video's eventually.


EDIT - Took the car for a long drive again - after it's nice a warm, a little bit of cooland is burped up. Not much, not steady either, just a few drops:






Last edited by hacker-pschorr; 04-12-2006 at 11:13 PM.
Old 04-11-2006, 12:14 AM
  #2  
Mrmerlin
Team Owner
 
Mrmerlin's Avatar
 
Join Date: May 2004
Location: Philly PA
Posts: 28,468
Received 2,573 Likes on 1,447 Posts
Default

Hi it might be a chance but look very carfully at the coolant hoses, a good chance that you may have a pinhole in one of them especially ones that were not removed for the TB replacement, Stan
Old 04-11-2006, 12:24 AM
  #3  
hacker-pschorr
Administrator - "Tyson"
Lifetime Rennlist
Member
Thread Starter
 
hacker-pschorr's Avatar
 
Join Date: Aug 2001
Location: Up Nort
Posts: 1,604
Received 2,225 Likes on 1,254 Posts
Default

Every hose is either brand new or less than a year old. Winter 2004 - 2005 I replaced every hose & vacuum lines. Good thought though, I'll double check them since I did man hadle a few to get the belt covers off / on. Could have damanged one.
Old 04-11-2006, 01:13 AM
  #4  
macreel
Addict
Rennlist Member

 
macreel's Avatar
 
Join Date: Apr 2004
Location: Puget Sound Area
Posts: 1,493
Likes: 0
Received 0 Likes on 0 Posts
Default

Is the water pump 'weep' hole dry ??

G'luck.
Old 04-11-2006, 01:24 AM
  #5  
heinrich
928 Collector
Rennlist Member

 
heinrich's Avatar
 
Join Date: Jan 2003
Location: Seattle
Posts: 17,270
Received 5 Likes on 5 Posts
Default

Thermostat housing / water bridge.
Old 04-11-2006, 01:26 AM
  #6  
hacker-pschorr
Administrator - "Tyson"
Lifetime Rennlist
Member
Thread Starter
 
hacker-pschorr's Avatar
 
Join Date: Aug 2001
Location: Up Nort
Posts: 1,604
Received 2,225 Likes on 1,254 Posts
Default

Originally Posted by heinrich
Thermostat housing / water bridge.
All new gaskets / o-rings there. I also shoved paper towels into the spots I could not see up there, came out dry. The valley is bone dry up top.
Old 04-11-2006, 01:30 AM
  #7  
heinrich
928 Collector
Rennlist Member

 
heinrich's Avatar
 
Join Date: Jan 2003
Location: Seattle
Posts: 17,270
Received 5 Likes on 5 Posts
Default

Well then my good friend Erik ...... I hates ta tell ya .. it walks like a pump, it quacks like a pump .....
Old 04-11-2006, 01:37 AM
  #8  
hacker-pschorr
Administrator - "Tyson"
Lifetime Rennlist
Member
Thread Starter
 
hacker-pschorr's Avatar
 
Join Date: Aug 2001
Location: Up Nort
Posts: 1,604
Received 2,225 Likes on 1,254 Posts
Default

Well, as long as my new head gaskets are not leaking, I'm not all that upset.
Old 04-11-2006, 07:52 AM
  #9  
SwayBar
Rennlist Member
 
SwayBar's Avatar
 
Join Date: Feb 2006
Location: Chicago Bears
Posts: 3,568
Received 342 Likes on 236 Posts
Default

The leak could be coming from the timing belt tensioner bolt which protrudes into the block's coolant passage.
Old 04-11-2006, 08:10 AM
  #10  
T Tanner
Advanced
 
T Tanner's Avatar
 
Join Date: Feb 2006
Location: Findlay Ohio
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default

Presure test the system, you'll find the leak!!!
Old 04-11-2006, 09:01 AM
  #11  
Mark
Addict
Rennlist Member

 
Mark's Avatar
 
Join Date: Jan 2003
Location: Mountains of GA!
Posts: 3,537
Likes: 0
Received 0 Likes on 0 Posts
Default

That sux, Hack....Got my fingers crossed for you hoping its something SIMPLE!!!

(Andrew - light a 'hopeful' candle in the shrine for hacker!!!!)
Old 04-11-2006, 09:17 AM
  #12  
Matt H
Race Director
 
Matt H's Avatar
 
Join Date: Jul 2003
Posts: 15,712
Likes: 0
Received 3 Likes on 3 Posts
Default

Erik, if you need a pressure tester I have one at the house you can borrow. Has all the attachments, pretty nice unit.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Old 04-11-2006, 10:01 AM
  #13  
Dave Sz.
Addict
Rennlist Member

 
Dave Sz.'s Avatar
 
Join Date: May 2001
Location: SE WI
Posts: 125
Likes: 0
Received 1 Like on 1 Post
Default

I'm with SwayBar or check all the hose clamps.

Dave Sz.
88 S4
80 Euro S
Old 04-11-2006, 10:24 AM
  #14  
byrdman454
Rennlist Member
 
byrdman454's Avatar
 
Join Date: Oct 2003
Location: St. Louis, MO
Posts: 1,094
Likes: 0
Received 10 Likes on 1 Post
Default

My tensioner is leaking too.
"Found my belt tensioner dripping - thanks to Jim Page, that leak is fixed (yes, it is really fixed, no drips here)."
Is there a post or online procedures for this? Can someone point me to it?

I have had problems on both my S4 and S2 where the upper rad hose hooks into the engine. It seems to have to be just right or it will leak. I would check here first. I thought it my water pump or the tensioner too. It was just a tiny leak at the hose.
Old 04-11-2006, 10:51 AM
  #15  
Brian B
Pro
 
Brian B's Avatar
 
Join Date: Oct 2002
Location: New Fairfield, Connecticut
Posts: 636
Likes: 0
Received 0 Likes on 0 Posts
Default

Hacker,
My 79 has the same coolant leak. When I run the car, no leak. When I shut it down, the waterworks start. Looks like its coming from my thermostat housing. I'm going to begin with replacing the hose from the metal pipe to the thermostat housing. I'm praying that the 928 Gods will be pleased and its not leaking from the housing gaskets or O ring...


Quick Reply: New Head Gaskets are on - Now leaking somewhere else. Initial post updated with pics.



All times are GMT -3. The time now is 11:25 AM.