Ott-X Pipe wanted
#2
Addict
Rennlist Member
Rennlist Member
Join Date: Jul 2002
Location: Edmonton, Ab
Posts: 2,286
Likes: 0
Received 0 Likes
on
0 Posts
But back to Ott X's-
To handle the increased immediate demand for the original Ott-X, and in the absence of Tom C, I am going to Louis' house when he returns from Tahoe 928 get together, to build about 10 to 15 units. I am taking PRE-ORDERS NOW. The first 10-15 orders will be the first to go out.
Pricing is a follows:
Ott-X- $399
Ott-X Stainless Steel Version- $499
Ott-X Ceramic Coated add- add $85
I am hoping to make delivery of the units before the close of July.
__________________
as posted by:
DoubleNutz
To handle the increased immediate demand for the original Ott-X, and in the absence of Tom C, I am going to Louis' house when he returns from Tahoe 928 get together, to build about 10 to 15 units. I am taking PRE-ORDERS NOW. The first 10-15 orders will be the first to go out.
Pricing is a follows:
Ott-X- $399
Ott-X Stainless Steel Version- $499
Ott-X Ceramic Coated add- add $85
I am hoping to make delivery of the units before the close of July.
__________________
as posted by:
DoubleNutz
#3
USMarine
Rennlist Member
Rennlist Member
Originally Posted by BrianG
But back to Ott X's-
To handle the increased immediate demand for the original Ott-X, and in the absence of Tom C, I am going to Louis' house when he returns from Tahoe 928 get together, to build about 10 to 15 units. I am taking PRE-ORDERS NOW. The first 10-15 orders will be the first to go out.
Pricing is a follows:
Ott-X- $399
Ott-X Stainless Steel Version- $499
Ott-X Ceramic Coated add- add $85
I am hoping to make delivery of the units before the close of July.
__________________
as posted by:
DoubleNutz
To handle the increased immediate demand for the original Ott-X, and in the absence of Tom C, I am going to Louis' house when he returns from Tahoe 928 get together, to build about 10 to 15 units. I am taking PRE-ORDERS NOW. The first 10-15 orders will be the first to go out.
Pricing is a follows:
Ott-X- $399
Ott-X Stainless Steel Version- $499
Ott-X Ceramic Coated add- add $85
I am hoping to make delivery of the units before the close of July.
__________________
as posted by:
DoubleNutz
#4
USMarine
Rennlist Member
Rennlist Member
Originally Posted by Darien Nunn
Since Andy sold his so fast, anyone else have an X Pipe for sale that will fit my 86.5?
#5
Nordschleife Master
A Plug for 928 Specialists
928 Specialists 304 Stainless Steel Modular Crossover Pipe System
Please visit our website at http://www.928gt.com for more details
Dyno Proven Performance (click here for dyno chart)
Max Peak HP gains of 24 Rear Wheel HP without cats and 19 Rear Wheel HP with Cats
Gains of 35+ Rear Wheel HP and 31+ Rear Wheel Ft/Lbs of Torque for No Cat version at 6000 rpm
Gains of 25+ Rear Wheel HP and 22+ Rear Wheel Ft/Lbs of Torque for Cat version at 6000 rpm
Dramatic Gains of HP and Torque from 4000 RPMs and Higher (see dyno chart)
Features:
Factory Fit and Quality worthy of your Porsche 928!
Direct Replacement for all 928 Factory Cat Sections (Note: 928s with Factory/Aftermarket dual exhaust systems only)
Unique Modular Design that enables you to easily switch from Cats to No Cats in approx 30 minutes with normal hand tools.
2.5" High Flow Design
Polished 304 Stainless Steel Construction
Cat version is 10 lbs lighter than stock factory cats and No Cat version is 14 lbs lighter!
Custom made Crossover section from preformed 304 Stainless Steel which guarantees repeatable performance with every production run (not dependant upon the varying skills of a welder like traditional hand made crossover sections)
Dual High Flow Stainless Cats section (Cat version only)
Cat version includes Modular Cat Sections AND Modular Straight Sections
If you buy the No Cat version and decide you want the Modular Cat Sections later they can be purchased separately.
Dual 02 Sensor Locations for addition of Wide Band 02 sensor AND Factory O2 Sensor (1 on each down pipe and 1 comes plugged)
Mandrill Bent 1-piece Head Pipes for maximum flow without turbulence created from welding multiple sections together
Click here for Super Large Photo
Please note : Pricing is for Introductory Special Pre-Orders Only.
We expect to be shipping these the second week of August.
Please visit our website at http://www.928gt.com for more details
----------------------------------------------------------------------------
THIS IS NOT SPAM. You are receiving this e-mail from the 928 Specialists Online Store because you are a registered customer and you have indicated that you want to receive e-mail notices and updates from us. If you do not want to receive any further mailings, simply reply to this e-mail with REMOVE in the subject line. You can also avoid getting any future messages by changing the settings in your "Account Info" settings, simply check "No" beside "OK To EMail".
The information contained in this communication may be confidential or legally privileged and is intended only for the recipient named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication or its contents is strictly prohibited. If you have received this communication in error, immediately advise the sender and delete the original and any copies from your computer system.
Please visit our website at http://www.928gt.com for more details
Dyno Proven Performance (click here for dyno chart)
Max Peak HP gains of 24 Rear Wheel HP without cats and 19 Rear Wheel HP with Cats
Gains of 35+ Rear Wheel HP and 31+ Rear Wheel Ft/Lbs of Torque for No Cat version at 6000 rpm
Gains of 25+ Rear Wheel HP and 22+ Rear Wheel Ft/Lbs of Torque for Cat version at 6000 rpm
Dramatic Gains of HP and Torque from 4000 RPMs and Higher (see dyno chart)
Features:
Factory Fit and Quality worthy of your Porsche 928!
Direct Replacement for all 928 Factory Cat Sections (Note: 928s with Factory/Aftermarket dual exhaust systems only)
Unique Modular Design that enables you to easily switch from Cats to No Cats in approx 30 minutes with normal hand tools.
2.5" High Flow Design
Polished 304 Stainless Steel Construction
Cat version is 10 lbs lighter than stock factory cats and No Cat version is 14 lbs lighter!
Custom made Crossover section from preformed 304 Stainless Steel which guarantees repeatable performance with every production run (not dependant upon the varying skills of a welder like traditional hand made crossover sections)
Dual High Flow Stainless Cats section (Cat version only)
Cat version includes Modular Cat Sections AND Modular Straight Sections
If you buy the No Cat version and decide you want the Modular Cat Sections later they can be purchased separately.
Dual 02 Sensor Locations for addition of Wide Band 02 sensor AND Factory O2 Sensor (1 on each down pipe and 1 comes plugged)
Mandrill Bent 1-piece Head Pipes for maximum flow without turbulence created from welding multiple sections together
Click here for Super Large Photo
Please note : Pricing is for Introductory Special Pre-Orders Only.
We expect to be shipping these the second week of August.
Please visit our website at http://www.928gt.com for more details
----------------------------------------------------------------------------
THIS IS NOT SPAM. You are receiving this e-mail from the 928 Specialists Online Store because you are a registered customer and you have indicated that you want to receive e-mail notices and updates from us. If you do not want to receive any further mailings, simply reply to this e-mail with REMOVE in the subject line. You can also avoid getting any future messages by changing the settings in your "Account Info" settings, simply check "No" beside "OK To EMail".
The information contained in this communication may be confidential or legally privileged and is intended only for the recipient named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication or its contents is strictly prohibited. If you have received this communication in error, immediately advise the sender and delete the original and any copies from your computer system.
Last edited by Drewster67; 12-30-2012 at 11:16 AM.