Supermodel Dyno
#3
Racer
Thread Starter
Yes. It was 105 degrees in the shop. The first run was the best, after that was downhill, then the tiedown strap broke so we called it a day. I am still a little rich, but plan on getting back to the dyno and work it out.
#5
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by all4woody
then the tiedown strap broke
Either way - excellent numbers!
Trending Topics
#8
Racer
Thread Starter
Thanks, My goal is 500RWHP. Still have to come up with a catchy tag: GOTWOOD, LNDSHRK (for those SNL fans), 928S4SC, SLEEPER (not). All suggestions welcome. Thanks, Woody.
#9
USMarine
Rennlist Member
Rennlist Member
Originally Posted by all4woody
Thanks, My goal is 500RWHP. Still have to come up with a catchy tag: GOTWOOD, LNDSHRK (for those SNL fans), 928S4SC, SLEEPER (not). All suggestions welcome. Thanks, Woody.
MPH DVR is postively my best plate yet- "Muff Diver"
Oh sorry for the brief hi-jack of your thread
#12
In Your Face, Ace
Rennlist Member
Rennlist Member
The increase in torque @2500 rpm is most impressive. Your near max stock numbers already at only 2500rpm. Put drag radials on it and get it to the track! The numbers from the track will mean more than any dyno sheet..imo
Do you have the intercooled maifold?
Do you have the intercooled maifold?
#13
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Very cool!
Did you get the runs data logged?
What are the specs of the set up for others that want to follow the progress...
Which gear ...exhaust set up, boost, fuel pressure at idle and under boost, injector sizes..etc etc.
Find a local drag strip and take it for a few runs. Practice your launch first as that low end TQ wont be kind to your clutch. My guess is you should be well in to the low 12s and over 110mph.
Post some pics when your done of the set up and the hood scoop you decided to go with.
nice job
#14
Dean of Rennlist, "I'm Listening"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
OK. Stupid question time from a SC newbie here.
One of you guys help me out here. Why do the HP and TQ curves both start out 1,000 rpms later in the SC run than they did in the NA run?
One of you guys help me out here. Why do the HP and TQ curves both start out 1,000 rpms later in the SC run than they did in the NA run?