sump baffle/crank scraper
#3
Addict
Rennlist Member
Rennlist Member
drnick,
mike schmidt has a setup like that that he designed for his car. not sure if he's active on this board though. he does frequent the email list.
ps did you get the sunroof?
mike schmidt has a setup like that that he designed for his car. not sure if he's active on this board though. he does frequent the email list.
ps did you get the sunroof?
#4
Drifting
Thread Starter
tom,
believe it or not im yet to check my mail as that involves a round trip of several hundred miles... dont ask!
how might i contact mike and does he have the scrapers or sump baffle or both?
are you using a drysump?
believe it or not im yet to check my mail as that involves a round trip of several hundred miles... dont ask!
how might i contact mike and does he have the scrapers or sump baffle or both?
are you using a drysump?
#5
Addict
Rennlist Member
Rennlist Member
nick,
mike has both scrapers and sump baffle. he's been very intent on also reducing the crankcase pressure as much as possible and last i heard, he had pretty much achieved that. very sharp cookie.
his email is mlschmidt@sprintmail.com
mike has both scrapers and sump baffle. he's been very intent on also reducing the crankcase pressure as much as possible and last i heard, he had pretty much achieved that. very sharp cookie.
his email is mlschmidt@sprintmail.com
#6
http://www.performance928.com/cgi-bi...ss_parent=1128 has some similar stuff...been trying to find it myself...
Trending Topics
#8
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Yup, Mr Scmidt is the resident guru on that installation. Let us know what you find also.
WOW, i didnt knwo Louie had a Website up, kewl!! Im sure glad Al Gore invented this here internet!
WOW, i didnt knwo Louie had a Website up, kewl!! Im sure glad Al Gore invented this here internet!
#9
louie doesn't sell them, but knows who made them...not sure if the guy wants to make more, says they are "easy with a few hand tools"...obviously, I wasn't clear about how much stuff I've destroyed with just a screwdriver...
#10
Nordschleife Master
I spent a lot of time investigating and plotting on this during my recent rebuild...and then threw it together stock. Just didn't have the time or scratch to fab something.
What seemed easiest was to put some commercial diamond screen in the bottom of the pan underneath the crank. This is available at Summit and Jegs for this purpose.
How much are those scrapers?
What seemed easiest was to put some commercial diamond screen in the bottom of the pan underneath the crank. This is available at Summit and Jegs for this purpose.
How much are those scrapers?