Michael Benno

Hey all, @Zirconocene and I are out in the garage today putting my car back together. We need to remember how to attach the fuel injection harness to the passenger side head. IIRC there was a P-clamp but I can't remember where it was attached.


hopefully @Rob Edwards can come to my rescue again

Kevin in Atlanta

There's a bracket that bolts the the back of the head. Then the P clamp attaches to it.

Rob Edwards

I’m away from my laptop but it’s a little L-shaped bracket that is held by the outboard cam cap retainer bolt on the rear face of the head. There’s an -18 normaclamp on the harness that bolts to it.

Kevin in Atlanta

It is a major pain in the **** to get the bracket into place and attach it to the head.

Michael Benno

Thanks for the verbal description you two. I could not remember if there was a bracket or not. I dug through all my parts again this evening and found the bracket, P-clamp, and securing bolts. I'll work out the installation in the next session.

Rob Edwards

This is the bracket:

Geo55

Ran out to see if I could get some pics and this is what I could get. Seems when I had the same issue, someone had their engine out and there were some clear pics of it. First 2 are from the top the other 3 are from the bottom

Geo55

So here is the post from when I did it. https://rennlist.com/forums/928-foru...-location.html

Michael Benno

@Geo55 , perfect thanks, I have exactly what I need now.