sprie

I am taking out the CEB to facilitate cleaning of the board, and i am also cleaning the relay pins and the fuse pins.

Usual problem: I have taken the board out, now ready to re-install, and there is one plug that I cannot work out where it goes / what it connects to.


The plug is towards the top, right on this photo.

gazfish

Could be the cable from the crank position sensor that plugs into the EZK box.

Mrmerlin

its for the potentiometer for operating with reduced octane.
Leave it alone,
it just hangs around unused.

sprie

Hi
Many thanks for responding, i could have been searching for nothing for ages.
atb