When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I could use a right side front fender inner rear cover: 928-504-316-03 "Wing Cover". I misplaced Stitch's at some point, and since I'm reinstalling the wiper tank and a new pump, I'd like to keep it a little bit free of crud.
I have a used RMB for a S4 looks like its made from galvanized metal with painted black tips. 175.00 sorry no pictures.
a set of S4 staggered lids that are polished 16 x 7 , 16 x 8 Ima sell for what they cost me 800.00 a few years ago still in the packaging,
free shipping to frenzy, IDK if the centercaps are included.
1 rear S4 PU cover might have a wave in it but some boiling water should restore it,
needs to be walnut blasted then refinished, its medium blue metallic now 150.00
1 set of bolt on bolt on spacers 32MM thick 120.00 these are good for early cars to fill your rear wells
Any interest in a Blaupunkt Portland SQR 26 and a Blaupunkt BPA-420 (4 x 20 watt) amplifier?
I have the DIN cable and all related wires.
Just found the box with everything in my basement.
I would need to test it.
But I remember everything was working when I removed the system from a previous pick-up truck around 1993...
I was thinking 200$ for the radio and 150$ for the amp.
Or 325$ for both.
Open to offer.
I can post pics if anyone is interested.
Thanks
Last edited by Bertrand Daoust; 09-18-2022 at 10:40 AM.
Carbon Fiber Weave shift plate and door switches/vents covers.
The driver side is good but the passenger side is not complete and the shift plate cover is cut. See pictures.
You will need to remove the old glue and put something else in place.
Originaly bought from Garage9. Free to any taker!
Computer Pin Out kit for 32V. , might fit 16v. This is a long cable with a pinout box. Links harness to computer, plus has a pinout box. Let's you operate the car, and has numbered pins to allow monitoring signals with your voltmeter or data logger.. $125 SETH
I have complete USA spider with silver emblem, probably just like Pete's, from 84. $100
Complete top of engine LJET fuel system, rails, pipes, 9th injector and both head air tubes. Includes, though uknown status, dampers and regulator. (Sans 8 ljet injectors, which I need to keep) $200.
Top half of radiator shroud, intact, with inlets, need paint. $50
Looking thru boxes for other good stuff. LJet Fueling System
Computer Pin Out kit for 32V. , might fit 16v. This is a long cable with a pinout box. Links harness to computer, plus has a pinout box. Let's you operate the car, and has numbered pins to allow monitoring signals with your voltmeter or data logger.. $125
I have complete USA spider with silver emblem, probably just like Pete's, from 84. $100
Complete top of engine LJET fuel system, rails, pipes, 9th injector and both head air tubes. Includes, though uknown status, dampers and regulator. (Sans 8 ljet injectors, which I need to keep) $200.
Top half of radiator shroud, intact, with inlets, need paint. $50
Looking thru boxes for other good stuff.
Chris, I will take the pinout cable and box for $125!!!
The RMB has stainless tips that are polished and galvanized tubing.
the bolt on spacers are 25 MM thick not 32,
they will kick out your rear wheels to fill the fenders
Pair of long tube 1 5/8" headers for S4. Painted red but don't appear to have been used. Won't fit on my 16V without modification. I was told they are Devek headers. Will figure out later today how much I want for them.