Bilstein Shock Supply Issues?
#16
If you already have Bilsteins installed and just need them repaired/refreshed you can send them to the Bilstein Technical Center in SoCal. Depending on time of year it can take a bit to get them back but the service is top notch. Had mine done a few years ago for something like $100/shock.
#18
#19
Just got a set of rebuilt early Bilsteins back from rebuilding- $405 including new lower bushings. Asked them not to paint them, like the patina look but they have all new guts in them.
Notes from Bilstein, for whatever it's worth:
All four dampers are in good condition for service.
Lower mount bushings on green dampers need to be replaced with E4-GV1-Z059A00.
Lower mount bushing on the other pair are marginal and we would recommend replacement as well (E4-GV1-Z059A01).
4 x SA001 REBUILD STANDARD SHOCK - $95.00/each = $380.00
2 x E4-GV1-Z059A00 Gummimetallverbindung - $6.48/each = $12.96
2 x E4-GV1-Z059A01 Gummimetallverbindung - $4.65/each = $9.30
Notes from Bilstein, for whatever it's worth:
All four dampers are in good condition for service.
Lower mount bushings on green dampers need to be replaced with E4-GV1-Z059A00.
Lower mount bushing on the other pair are marginal and we would recommend replacement as well (E4-GV1-Z059A01).
4 x SA001 REBUILD STANDARD SHOCK - $95.00/each = $380.00
2 x E4-GV1-Z059A00 Gummimetallverbindung - $6.48/each = $12.96
2 x E4-GV1-Z059A01 Gummimetallverbindung - $4.65/each = $9.30
#21
Thread Starter
Official Bay Area Patriot
Fuse 24 Assassin
Rennlist Member
Fuse 24 Assassin
Rennlist Member
Joined: Nov 2001
Posts: 31,653
Likes: 119
Gummimetallverbindung?
Is that a safe word?
Anywho I just took delivery on them today. Gonna do 1 turn firm on the front and start with a 1/4 turn in the back. Then I'll put some new threaded collars on them. Last I saw, these need to be JB Welded in place.
Is that a safe word?
Anywho I just took delivery on them today. Gonna do 1 turn firm on the front and start with a 1/4 turn in the back. Then I'll put some new threaded collars on them. Last I saw, these need to be JB Welded in place.
Last edited by Mongo; 06-09-2022 at 07:36 PM.
#23
Rennlist Member
Joined: Feb 2011
Posts: 2,248
Likes: 504
From: Mostly in my workshop located in Sweden.
#24