Fuel Regulator Vacuum lines ID and OD dimensions
#1
Intermediate
Thread Starter
Fuel Regulator Vacuum lines ID and OD dimensions
Hi
I refreshed the vacuum lines some time ago with soft ones which I am concerned may be collapsing and so want to replace with standard hard lines.
I am looking for the spec of the vacuum lines that link the damper and regulators together for a 1985 16v S2 Manual RoW. I think they are 4mm OD and 2mm ID but I want to make sure I am ordering the right thing and can't find a definitive spec. The ID could be 2.5mm.
Clarification if there is a difference between materials (Nylon appears to be the standard) would also help....
Thank you as always.
David M
1985 S2 Manual
I refreshed the vacuum lines some time ago with soft ones which I am concerned may be collapsing and so want to replace with standard hard lines.
I am looking for the spec of the vacuum lines that link the damper and regulators together for a 1985 16v S2 Manual RoW. I think they are 4mm OD and 2mm ID but I want to make sure I am ordering the right thing and can't find a definitive spec. The ID could be 2.5mm.
Clarification if there is a difference between materials (Nylon appears to be the standard) would also help....
Thank you as always.
David M
1985 S2 Manual
#2
Rennlist Member
Hi
I refreshed the vacuum lines some time ago with soft ones which I am concerned may be collapsing and so want to replace with standard hard lines.
I am looking for the spec of the vacuum lines that link the damper and regulators together for a 1985 16v S2 Manual RoW. I think they are 4mm OD and 2mm ID but I want to make sure I am ordering the right thing and can't find a definitive spec. The ID could be 2.5mm.
Clarification if there is a difference between materials (Nylon appears to be the standard) would also help....
Thank you as always.
David M
1985 S2 Manual
I refreshed the vacuum lines some time ago with soft ones which I am concerned may be collapsing and so want to replace with standard hard lines.
I am looking for the spec of the vacuum lines that link the damper and regulators together for a 1985 16v S2 Manual RoW. I think they are 4mm OD and 2mm ID but I want to make sure I am ordering the right thing and can't find a definitive spec. The ID could be 2.5mm.
Clarification if there is a difference between materials (Nylon appears to be the standard) would also help....
Thank you as always.
David M
1985 S2 Manual
Others may confirm such