GTS WING From Holbert Car for sale
#16
Rennlist Member
Thread Starter
The following users liked this post:
GUMBALL (06-25-2020)
#20
Rennlist Member
And he doesn't respond to my PMs.
#21
Rennlist Member
Thread Starter
#24
Rennlist Member
Pictures of the underside please.
#25
Rennlist Member
Mark,
IF (big if) it is like the fiberglass S4 wing on my 86.5, the mounting holes do not match the stock wings. (June 25, 2020 edit: Mark's fiberglass GTS wing has stock S4/GT/GTS mounting locations). Recommend you provide dimensions for any potential buyers.
That said, it is amazingly light compared to the hinged wing (only one I have compared it to).
Dec 11, 2019 Edit: My Rennlist "Folding S4 Wing" album has what I believe are the stock 928 measurements, as based on a stock folding wing. The M6 x 1.0 bolt holes on the stock folding wing are about 65mm apart at each side. This (and the side to side hole measurements) differs from my fiberglass S4 Wing. (Measurements are stated in the image filenames which can be seen when you click on them).
IF (big if) it is like the fiberglass S4 wing on my 86.5, the mounting holes do not match the stock wings. (June 25, 2020 edit: Mark's fiberglass GTS wing has stock S4/GT/GTS mounting locations). Recommend you provide dimensions for any potential buyers.
That said, it is amazingly light compared to the hinged wing (only one I have compared it to).
Dec 11, 2019 Edit: My Rennlist "Folding S4 Wing" album has what I believe are the stock 928 measurements, as based on a stock folding wing. The M6 x 1.0 bolt holes on the stock folding wing are about 65mm apart at each side. This (and the side to side hole measurements) differs from my fiberglass S4 Wing. (Measurements are stated in the image filenames which can be seen when you click on them).
Last edited by hernanca; 06-25-2020 at 01:11 PM.
#26
Rennlist Member
Thread Starter
Mark,
IF (big if) it is like the fiberglass S4 wing on my 86.5, the mounting holes do not match the stock wings. Recommend you provide dimensions for any potential buyers.
That said, it is amazingly light compared to the hinged wing (only one I have compared it to).
Edit: My Rennlist "Folding S4 Wing" album has what I believe are the stock 928 measurements, as based on a stock folding wing. The M6 x 1.0 bolt holes on the stock folding wing are about 65mm apart at each side. This (and the side to side hole measurements) differs from my fiberglass S4 Wing. (Measurements are stated in the image filenames which can be seen when you click on them).
IF (big if) it is like the fiberglass S4 wing on my 86.5, the mounting holes do not match the stock wings. Recommend you provide dimensions for any potential buyers.
That said, it is amazingly light compared to the hinged wing (only one I have compared it to).
Edit: My Rennlist "Folding S4 Wing" album has what I believe are the stock 928 measurements, as based on a stock folding wing. The M6 x 1.0 bolt holes on the stock folding wing are about 65mm apart at each side. This (and the side to side hole measurements) differs from my fiberglass S4 Wing. (Measurements are stated in the image filenames which can be seen when you click on them).