down shift cable needed 1984 928s
07-23-2018, 06:45 PM
#2
Chronic Tool Dropper
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Try a phone call to our regular suppliers. There's usually a workaround.
07-23-2018, 07:06 PM
#3
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Easy peasy - cable only pushed through from the transmission end - crimped at the throttle end with a threaded rod to take the ball joint.
$140
$140
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
07-23-2018, 07:08 PM
#4
Racer
Thread Starter
I called around and all they have is the inside cable. The problem with the one I bought is the sheath near the transmission is stretched out. So I need the conduit as well. 239 dollars from Porsche. 928 international is NLA.
07-23-2018, 07:23 PM
#5
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
I am confused - you just told me the shroud/sheath was OK?
In that case the cable will not fix the issue.
The complete control cable is NLA.
In that case the cable will not fix the issue.
The complete control cable is NLA.