Engine Wiring Harness through firewall routing
#1
Instructor
Thread Starter
Join Date: Dec 2016
Location: Silverton, OR
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Engine Wiring Harness through firewall routing
Please see pics below.
?#1. Is the engine main wire harness bolted to the back of the block or somewhere else? See pic
?#2 does the harness go higher over some of those hoses/metal tube?
I should have taken more pictures when pulling!
any help would be greatly apreciated!
?#1. Is the engine main wire harness bolted to the back of the block or somewhere else? See pic
?#2 does the harness go higher over some of those hoses/metal tube?
I should have taken more pictures when pulling!
any help would be greatly apreciated!
#4
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2003
Location: Gone. On the Open Road
Posts: 16,329
Received 1,543 Likes
on
1,007 Posts
Your 928 is pre-'87. I don't have many pre-'87 pictures and none of how the FI harness is fastened to the block.
However, the to-firewall routing should be the same as for '87+.
This is the way the fuel injection harness should route to the firewall:
However, the to-firewall routing should be the same as for '87+.
This is the way the fuel injection harness should route to the firewall:
The following users liked this post:
rahulsingh (11-15-2019)