928 Pro Tour LS3 / Z06 Build
#211
Rennlist Member
Thread Starter
#212
#213
Rennlist Member
Thread Starter
Fishah,
you were correct on the shock being off by 180. I didn’t notice the bottom of the shocksmounts are welded with a slight angled.
I very much appreciate you catching this and letting me know.
you were correct on the shock being off by 180. I didn’t notice the bottom of the shocksmounts are welded with a slight angled.
I very much appreciate you catching this and letting me know.
#214
Burning Brakes
Your project is inspiring, and I've been enjoying following along, so it's absolutely my pleasure to assist. It looks much better now. I'm glad that you got it sorted!
Like I said I did the same exact thing a couple weeks ago, and I was really scratching on what I did wrong because I knew something looked just a little off.
Like I said I did the same exact thing a couple weeks ago, and I was really scratching on what I did wrong because I knew something looked just a little off.
#215
Rennlist Member
Thread Starter
Started working on power steering lines. I am using modified stock lines. I utilized the banjo flanges to the steering box and cut the steel tubing just above the mount on the fender wall. I welded the AN-6 fitting on and used the hight pressure fittings and hose. I was able to make the pressure line and installed to power steering pump after installing a extended AN fitting. I am not happy with the way the return line runs to the plastic tank, so I am either going to make new tank or see if there are other options mounting to plastic tank.
#216
Rennlist Member
Thread Starter
Picked up 993 8 way Electric seats. The seats are new, meaning they were removed soon after receiving the car and put in storage. The seats are in perfect condition. I did the math and it came out cheaper to buy these seats instead of redoing my seats, plus I get 20 years newer technology if any in the motors. The size and mounts are the same as the 928 seats.
#217
Rennlist Member
At this point I don't know what is more impressive- the build or your footwear.
#218
Rennlist Member
Thread Starter
Finished the coolant tank after a few more mods. Plumbed the heater hoses and made a new radiator line from motor to radiator. I used some aluminum billet clamps that add a nice touch and clamp very well.
#220
Rennlist Member
Thread Starter
https://928motorsports.com/parts/coolant_reservoir.php
#222
Rennlist Member
Thread Starter
Fully understand where you are coming from.
#223
Rennlist Member
Thread Starter
Decided to ditch the 5 gallon windshield washer tank. I purchased a AC Delco pump and built a new aluminum tank.
Last edited by Blagave; 11-24-2017 at 12:29 AM.