|
Originally Posted by Fishah
(Post 14611190)
It's your car my friend, I'm just trying to help. Dismiss me if you'd like, but the photo looks off :)
They look like Konis? That's what mine were. Thanks for pointing it out. |
Originally Posted by Fishah
(Post 14611190)
It's your car my friend, I'm just trying to help. Dismiss me if you'd like, but the photo looks off :)
They look like Konis? That's what mine were. |
Fishah,
you were correct on the shock being off by 180. I didn’t notice the bottom of the shocksmounts are welded with a slight angled. I very much appreciate you catching this and letting me know. :cheers: https://cimg2.ibsrv.net/gimg/rennlis...b0ee3cf63.jpeg |
Your project is inspiring, and I've been enjoying following along, so it's absolutely my pleasure to assist. It looks much better now. I'm glad that you got it sorted!
Like I said I did the same exact thing a couple weeks ago, and I was really scratching on what I did wrong because I knew something looked just a little off. |
Started working on power steering lines. I am using modified stock lines. I utilized the banjo flanges to the steering box and cut the steel tubing just above the mount on the fender wall. I welded the AN-6 fitting on and used the hight pressure fittings and hose. I was able to make the pressure line and installed to power steering pump after installing a extended AN fitting. I am not happy with the way the return line runs to the plastic tank, so I am either going to make new tank or see if there are other options mounting to plastic tank.
https://cimg2.ibsrv.net/gimg/rennlis...7d0e88ccf.jpeg https://cimg4.ibsrv.net/gimg/rennlis...f367a0121.jpeg https://cimg5.ibsrv.net/gimg/rennlis...a3edc22d4.jpeg https://cimg0.ibsrv.net/gimg/rennlis...7822bb6a2.jpeg https://cimg1.ibsrv.net/gimg/rennlis...ab16fbee6.jpeg https://cimg3.ibsrv.net/gimg/rennlis...2ee20f2bd.jpeg https://cimg2.ibsrv.net/gimg/rennlis...33d51e239.jpeg |
https://cimg5.ibsrv.net/gimg/rennlis...9cb8a2368.jpeg
https://cimg7.ibsrv.net/gimg/rennlis...a4d8571ac.jpeg https://cimg6.ibsrv.net/gimg/rennlis...ad37e62f8.jpeg Picked up 993 8 way Electric seats. The seats are new, meaning they were removed soon after receiving the car and put in storage. The seats are in perfect condition. I did the math and it came out cheaper to buy these seats instead of redoing my seats, plus I get 20 years newer technology if any in the motors. The size and mounts are the same as the 928 seats. |
At this point I don't know what is more impressive- the build or your footwear.
|
Finished the coolant tank after a few more mods. Plumbed the heater hoses and made a new radiator line from motor to radiator. I used some aluminum billet clamps that add a nice touch and clamp very well.
https://cimg7.ibsrv.net/gimg/rennlis...130104374.jpeg https://cimg6.ibsrv.net/gimg/rennlis...75d7c4dc9.jpeg https://cimg9.ibsrv.net/gimg/rennlis...005f561c9.jpeg https://cimg8.ibsrv.net/gimg/rennlis...60172b0ee.jpeg https://cimg0.ibsrv.net/gimg/rennlis...d01549d38.jpeg https://cimg1.ibsrv.net/gimg/rennlis...fc5e0cf2f.jpeg |
Would you be interested/willing to build a second overflow tank like that one?
|
Originally Posted by SpearLazyT
(Post 14620468)
Would you be interested/willing to build a second overflow tank like that one?
https://928motorsports.com/parts/coolant_reservoir.php |
I do understand about being busy, and appreciate your response. I am looking for one for an LS3, and will look at his site, but am not a big fan.
|
Originally Posted by SpearLazyT
(Post 14620670)
I do understand about being busy, and appreciate your response. I am looking for one for an LS3, and will look at his site, but am not a big fan.
Fully understand where you are coming from. |
Decided to ditch the 5 gallon windshield washer tank. I purchased a AC Delco pump and built a new aluminum tank.
https://cimg5.ibsrv.net/gimg/rennlis...fb6527936.jpeg https://cimg4.ibsrv.net/gimg/rennlis...e94c71888.jpeg https://cimg0.ibsrv.net/gimg/rennlis...796721327.jpeg https://cimg1.ibsrv.net/gimg/rennlis...624743d6c.jpeg https://cimg9.ibsrv.net/gimg/rennlis...1202141d3.jpeg https://cimg8.ibsrv.net/gimg/rennlis...add34455a.jpeg https://cimg2.ibsrv.net/gimg/rennlis...b00ece94b.jpeg https://cimg3.ibsrv.net/gimg/rennlis...76d99dc53.jpeg https://cimg4.ibsrv.net/gimg/rennlis...e2def0bd3.jpeg |
Finally, you make it to slippers.
I personally favor the Costco Dearfoam's for my garage/shop attire... |
You definitely have more than fabrication skills with that left is right, right is left stance in 2nd picture!
|
| All times are GMT -3. The time now is 01:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands