Moving Tach on 924S
06-08-2003, 09:55 PM
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Moving Tach on 924S
How difficult is it to move the tach to the speedometer position? I have an '88 924S that I race and it is hard to see the tach. The speedometer isn't really needed for the track. If it can't be moved, any ideas?
Thanks, Jim in St. Louis
Thanks, Jim in St. Louis
06-11-2003, 01:05 PM
#3
Addict
Rennlist Member
Rennlist Member
See other post for details, but yes, it's do-able...
07-23-2003, 09:04 AM
#4
2nd Gear
Join Date: Jul 2003
Location: Belgium
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hello !
You can do it, I've made it on my 924
Look :
http://ibelgique.ifrance.com/titchati/110-1047_IMG.JPG
The cable for the speedo is quite short, and I have to look for another way to fit this cable (but it works).
See ya !
You can do it, I've made it on my 924
Look :
http://ibelgique.ifrance.com/titchati/110-1047_IMG.JPG
The cable for the speedo is quite short, and I have to look for another way to fit this cable (but it works).
See ya !
07-28-2003, 12:55 AM
#5
Wax On, Wax Off
Rennlist Member
Rennlist Member
Join Date: May 2003
Location: 5280 ft above the sea
Posts: 17,727
Likes: 0
Received 4 Likes
on
4 Posts
I have it done too...the PO did it...tach in the center, speedo on the right. it looks REALLY good, and is realy functional too since I've been known to have my car on the track...
